An Introduction to the Flexographic Printing Plates Environmental Footprint CalculatorTM from MacDermid Printing Solutions
ثبت نشده
چکیده
منابع مشابه
Fabrication of large-area stamps, moulds, and conformable photomasks for soft lithography
Low-cost fabrication is essential to the successful introduction of organic electronics and reel-to-reel manufacturing processes. Here it is proposed that extending flexography into the micrometre-size resolution regime may provide an economical commercialization path for plastic devices. Flexography is a high-speed technique commonly used for printing onto very large-area flexible substrates. ...
متن کاملPreparation of Reversible Thermochromic Ink for Flexography Printing on Paper and Study its Colorimetric Properties
Thermochromic printing inks could be security inks which respond to the color change when are being exposed to different temperatures. These inks with unusual chemical and physical specific characteristics are mostly produced for flexographic, screen and rotogravure printing systems under the supervision of skilled technical experts and with precise security controls. Since flexographic thermoc...
متن کاملVOC level control by ventilation improvement of Flexography printing room using CFD modeling
Using Computational Fluid Dynamics (CFD) technique, the dispersion contours and the exposure rate of Flexographic printing workers to VOCs in a printing department is evaluated. Firstly, VOCs distribution is determined in the printing room due to the existing ventilation system. Through next steps, 4 scenarios for lowering VOCs concentration and its exposure rate to workers are analyzed. Concen...
متن کاملEcological footprint of university students: Does gender matter?
To determine if there is a gender difference in the resource consumption activities of students in Central Mindanao University, a Philippine state university, an ecological foot printing study was conducted in August 2014. Consumption data from 380 student respondents were gathered using a survey questionnaire. A web-based software created by the Global Footprint Network was used to convert the...
متن کاملStudy of PLA Printability with Flexography Ink: Comparison with Common Packaging Polymer
Today, the economic consumption of biodegradable polymers is of capital importance in many applications. One of the most commonly used biopolymers is polylactic acid (PLA). The printability of the biodegradable film has not been fully investigated. This work tested the printability of polylactic acid (PLA) films and compared the print qualities to common packaging films like low density pol...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010