Numerical study on the measurement of thin film mechanical properties by means of nanoindentation
نویسندگان
چکیده
Nanoindentation is a technique commonly used for measuring thin film mechanical properties such as hardness and stiffness. In this study, we used the finite element method to investigate the effect of substrate and pileup on hardness and stiffness measurements of thin film systems. We define a substrate effect factor and construct a map that may be useful in the interpretation of indentation measurements when it is not possible to make indentations shallow enough to avoid the influence of the substrate on the measurements. A new technique for measuring mechanical properties of thin films by nanoindentation is suggested at the end of this article.
منابع مشابه
A Brief Review of Nanoindentation Technique and its Applications in Hybrid Nanocomposite Coatings
Nanoindentation techniques are widely used for the study of nanomechanical properties of thin nanocomposite coatings. Theoretical concepts and practical use of nanoindentation method are summarized with reporting the applications of these tests in characterization of some particular thin nanocomposite hybrid coatings prepared by sol-gel process. The better mechanical properties can be obtained ...
متن کاملA Brief Review of Nanoindentation Technique and its Applications in Hybrid Nanocomposite Coatings
Nanoindentation techniques are widely used for the study of nanomechanical properties of thin nanocomposite coatings. Theoretical concepts and practical use of nanoindentation method are summarized with reporting the applications of these tests in characterization of some particular thin nanocomposite hybrid coatings prepared by sol-gel process. The better mechanical properties can be obtained ...
متن کاملInvestigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting
In this study various yttria doped zirconia based thin films were prepared by the aqueous tape casting method. The rheological property of the paste was studies. The phase content and microstructure of the samples was investigated by X-ray diffraction and scanning electron microscope, respectively. The mechanical properties of thin films were studied by Vickers microhardness and nanoindentatio...
متن کاملEffect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition
This study, investigates the effect of bias voltage on structural changes of diamond-like carbon thin film created by ion beam deposition is investigated. For this purpose, the bias voltage in the values of 0 V, -50 V, -100 V and -150 V on the AA5083 aluminum alloy was considered. Raman spectroscopy was used to evaluate structural. Influence of the bias voltage on the thickness and roughness of...
متن کاملEffect of Cu Content on TiN-Cu Nanocomposite Film Properties: Structural and Hardness Studies
Titanium nitride-Copper (TiN-Cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. The influence of Cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. Structural properties of the films were studied by X-ray diffraction pattern. Topography of t...
متن کامل