Influence of Adjacent Metal Cover Planes on EMC Filter Structures
نویسندگان
چکیده
This paper deals with the influence of metal cover planes close to SMD filter structures. The low-pass structures are used for EMC purpose and work in a frequency range of 100 kHz to 4 GHZ. It will be shown by measurement and simulation that a close cover plane changes the filter behavior significantly in dependency of the filter component used. For low and high impedance filter structures different influences are obtained; a parameter study was carried out in order to derive design rules.
منابع مشابه
Design and Simulation of a Metal-Insulator-Metal Filter Based on Plasmonic Split Ring
In this paper, a plasmonic filter made of a split ring, two U-shaped structures and two straight waveguides is designed and investigated. In the proposed structure, the split ring and U-shaped structures are situated between straight waveguides. Simulations are done based on FDTD method. Split ring, U-shaped structures and straight waveguides are made of air in the silver background. In the pro...
متن کاملWLAN Substrate Integrated Waveguide Filter with Novel Negative Coupling Structure
A fourth-degree Substrate Integrated Waveguide (SIW) crossed coupled band pass filter for WLAN band is designed by using a new negative coupling structure. It consists of two U shape microstrip lines on top and bottom planes with via holes at the center of them. This paper investigates the phase characteristics of negative and positive coupling structures and their effects. The design, fabricat...
متن کاملTime-Dependent Structural Behavior of Repaired Corroded RC Columns Located in a Marine Site
The chloride corrosion of reinforcing steel in reinforced concrete (RC) structures is a significant reason for premature deterioration and failure of RC structures in aggressive environments such as Persian Gulf region. This is one of the most important sources of engineering and economic problems in developed countries. So, the repair and maintenance of RC structures exposed to corrosive envir...
متن کاملEfficient Modelling of Band-Gap and Metamaterial Structures in EMC
The purpose of this research is to present efficient models of novel materials and surfaces based on metamaterials (MTM) and/or electromagnetic band-gap structures (EBG) suitable for large scale simulation in electromagnetic compatibility (EMC) problems. It is shown that the employment of digital filter (DF) techniques provides an efficient means of describing such materials (which inevitably c...
متن کاملImpulsive Noise Elimination Considering the Bit Planes Information of the Image
Impulsive noise is one of the imposed defectives degrades the quality of images. Performance of many image processing applications directly depends on the quality of the input image. Hence, it is necessary to de-noise the degraded images without losing their valuable information such as edges. In this paper we propose a method to remove impulsive noise from color images without damaging the ima...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- IEICE Transactions
دوره 93-B شماره
صفحات -
تاریخ انتشار 2010