Nacre-like materials using a simple doctor blading technique: Fabrication, testing and modeling.

نویسندگان

  • M Mirkhalaf
  • F Barthelat
چکیده

The remarkable mechanical performance of biological materials such as bone, nacre, and spider silk stems from their staggered microstructure in which stiff and strong reinforcements are elongated in the direction of loading, separated by softer interfaces, and shifted relative to each other. This structure results in useful combinations of modulus, strength and toughness and therefore is increasingly mimicked in bio-inspired engineering composites. Here, we report the use of a simple and versatile technique based on doctor-blading to fabricate staggered composites of microscopic alumina tablets with high alignment in a chitosan matrix. Tensile tests on these nacre-like materials show that the modulus and strength of the composite films are enhanced by the incorporation of ceramic tablets, but only up to 15vol% after which all properties degrade. This phenomenon, also reported in the past for most of nacre-like materials, composed of micro/nano tablets, obtained from different techniques, has been limiting our ability to produce large volumes of high-performance nacre-like materials. Examination of the structure of the films revealed that at lower tablet concentrations the tablets are well-aligned and well dispersed thorough the volume of the film. At 15vol% and beyond, we observed tablet misalignment and clustering. In order to investigate the impact of these imperfections on material performance we developed large scale finite element models representative of the structure of the composite films. These models show that the mechanical performance significantly degrades with tablet misalignment, and especially at high tablet concentrations. The simulations along with the SEM images therefore quantitatively explain the experimental trends, e.g. the degradation of mechanical properties at high tablet contents.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A laser-engraved glass duplicating the structure, mechanics and performance of natural nacre.

Highly mineralized biological materials such as nacre (mother of pearl), tooth enamel or conch shell boast unique and attractive combinations of stiffness, strength and toughness. The structures of these biological materials and their associated mechanisms are now inspiring new types of advanced structural materials. However, despite significant efforts, no bottom up fabrication method could so...

متن کامل

Deposition of hole-transport materials in solid-state dye-sensitized solar cells by doctor-blading

We report using doctor-blading to replace conventional spin coating for the deposition of the hole-transport material spiro-OMeTAD (2,20 ,7,70-tetrakis-(N,N-di-p-methoxyphenylamine)-9,90-spirobifluorene) in solid-state dye-sensitized solar cells. Doctor-blading is a roll-to-roll compatible, large-area coating technique, is capable of achieving the same spiro-OMeTAD pore filling fraction as spin...

متن کامل

The toughening mechanism of nacre and structural materials inspired by nacre.

The structure and the toughening mechanism of nacre have been the subject of intensive research over the last 30 years. This interest originates from nacre's excellent combination of strength, stiffness and toughness, despite its high, for a biological material, volume fraction of inorganic phase, typically 95%. Owing to the improvement of nanoscale measurement and observation techniques, signi...

متن کامل

Failure mode transition in nacre and bone-like materials.

Mineralized biological materials such as nacre or bone achieve remarkable combinations of stiffness and toughness by way of staggered arrangements of stiff components (nanoscale or microscale fibers or tablets) bonded by softer materials. Under applied stress these components slide on one another, generating inelastic deformations and toughness on the macroscale. This mechanism is prominent in ...

متن کامل

Room temperature fabrication of porous ZnO photoelectrodes for flexible dye-sensitized solar cells.

We fabricated ZnO photoelectrodes at room temperature by doctor-blading ZnO gel; the adequate interparticle connection and the effective ammonia activation process improved the flexible DSC's efficiency to 3.8% (under 100 mW cm(-2)).

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the mechanical behavior of biomedical materials

دوره 56  شماره 

صفحات  -

تاریخ انتشار 2016