FPGA Implementation Vector Control of Tandem Converter Fed Induction Machine
نویسندگان
چکیده
The paper focuses on the implementation in Field Programmable Gate Arrays (FPGA) of vector control systems of the induction motor supplied from the tandem (hybrid) static-frequency converter. The paper tries to give a synthesis of the tandem vector control structure implementation. The implementation was made using the library elements for rapid prototyping of vector control systems for induction motor. The implementation analysis is presented.
منابع مشابه
FPGA Implementation of the Reconfigurable Control System for AC Drives Fed by Tandem Converter
The paper focuses on the implementation in Field Programmable Gate Arrays (FPGA) of vector control systems of the induction motor supplied from the tandem (hybrid) staticfrequency converter. Reconfigurable control structure ensures different strategies for operating modes with non-failed and partial-failed converter. The reconfiguration process introduces perturbations in the vector controlled ...
متن کاملA Comparative Study on Predictive and ISVM Direct Torque Control Methods for a Doubly Fed Induction Machine Fed by an Indirect Matrix Converter
This paper presents a comparative study on the Predictive Direct Torque Control method and the Indirect Space Vector Modulation Direct Torque Control method for a Doubly-Fed Induction Machine (DFIM) which its rotor is fed by an Indirect Matrix Converter (IMC). In Conventional DTC technique, good transient and steady-state performances are achieved but it presents a non constant switching fr...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملMatrix Converter for Six Phase Induction Machine Drive System
ABSTRACT In this paper, a novel vector controlled sixphase induction machine which is fed from six-phase matrix converter is proposed. Though the practical implementation of matrix converter to vector controlled three phase induction motors is limited and still under investigation due to switches devices implementation difficulties and complication of modulation technique and commutation contro...
متن کاملIncreasing the Efficiency of the Power Electronic Converter for a Proposed Dual Stator Winding Squirrel-Cage Induction Motor Drive Using a Five-Leg Inverter at Low Speeds
A dual stator winding squirrel-cage induction motor (DSWIM) is a brushless single-frame induction motor that contains a stator with two isolated three-phase windings wound with dissimilar numbers of poles. Each stator winding is fed by an independent three-phase inverter. The appropriate efficiency of this motor is obtained when the ratio of two frequencies feeding the machine is equal to the r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005