The Enthalpies of Mixing of Liquid Ni-Sn-Zn Alloys
نویسندگان
چکیده
The partial and integral enthalpies of mixing of liquid ternary Ni-Sn-Zn alloys were determined. The system was investigated along two sections xNi/xSn ≈ 1:9, xNi/xSn ≈ 1:6 at 1073 K and along two sections xSn/xZn ≈ 9:1, xSn/xZn ≈ 4:1 at 873 K. The integral enthalpy of mixing at each temperature is described using the Redlich-Kister-Muggianu model for substitutional ternary solutions. In addition, the experimental results were compared with data calculated according to the Toop extrapolation model. The minimum integral enthalpy of approx. -20000 J mol-1 corresponds to the minimum in the constituent binary Ni-Sn system, the maximum of approx. 3000 J mol-1 is equal to the maximum in the binary Sn-Zn system.
منابع مشابه
Enthalpies of mixing of liquid ternary Co–Li–Sn alloys
ABSTRACT The partial and integral molar enthalpies of mixing of liquid Co-Li-Sn alloys were determined using drop calorimetry. The investigations were performed along six sections by the addition of lithium to mixtures with the compositions [Formula: see text]/[Formula: see text] ≈ 2:98, [Formula: see text]/[Formula: see text] ≈ 1:9, and [Formula: see text]/[Formula: see text] ≈ 3:17 as well as...
متن کاملInvestigation of interfacial reactions between Sn–Zn solder with electrolytic Ni and electroless Ni(P) metallization
In this study, interfacial reactions of electrolytic Ni and electroless Ni(P) metallization of the ball-grid-array (BGA) substrate with the molten n–9Zn (wt.%) eutectic solder alloy were investigated, focusing on the shear strengths and the identification of the intermetallic compound IMC) phases at various reflow periods. Zn-containing Pb-free solder alloys were kept in molten condition (240 ◦...
متن کاملAtomic diffusion modeling and Investigation of joining properties of TLP in AA2024 to AA6061 alloys
In this study, to bond AA2024 and AA6061 alloys to each other, three elements (Sn, Zn and Ga) were considered as interlayer elements in terms of atomic diffusion depth in the base metal and storage at 453°C for 2 days, 10 hours, 210 minutes, and 30 seconds that they were examined for atomic diffusion modeling. Finally, the two alloys were connected at a temperature of 453°C in a furnace enviro...
متن کاملAtomic diffusion modeling and Investigation of joining properties of TLP in AA2024 to AA6061 alloys
In this study, to bond AA2024 and AA6061 alloys to each other, three elements (Sn, Zn and Ga) were considered as interlayer elements in terms of atomic diffusion depth in the base metal and storage at 453°C for 2 days, 10 hours, 210 minutes, and 30 seconds that they were examined for atomic diffusion modeling. Finally, the two alloys were connected at a temperature of 453°C in a furnace enviro...
متن کاملHeat of Mixing and Activities in Liquid Al-Sn Alloys
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namen...
متن کامل