Bidirectional Forwarding Detection (BFD) on Link Aggregation Group (LAG) Interfaces
نویسندگان
چکیده
This document defines a mechanism to run Bidirectional Forwarding Detection (BFD) on Link Aggregation Group (LAG) interfaces. It does so by running an independent Asynchronous mode BFD session on every LAG member link. This mechanism allows the verification of member link continuity, either in combination with, or in absence of, Link Aggregation Control Protocol (LACP). It provides a shorter detection time than what LACP offers. The continuity check can also cover elements of Layer 3 (L3) bidirectional forwarding. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
منابع مشابه
Management of DiffServ-over-MPLS Transit Networks with BFD/OAM in ForCES Architecture
This paper proposes a management of DiffServ-over-MPLS transit network with BFD(Bidirectional Forwarding Detection)/OAM (operation, administration and maintenance) in ForCES (Forwarding and Control Element Separation) architecture for QoS-guaranteed DiffServ-over-MPLS traffic engineering. The proposed BFD and ForCES functions are implemented on Intel 2400 network processor, where BFD/OAM packet...
متن کاملCommon Interval Support in Bidirectional Forwarding Detection
Bidirectional Forwarding Detection (BFD) requires that messages be transmitted at regular intervals and provides a way to negotiate the interval used by BFD peers. Some BFD implementations may be restricted to only support several interval values. When such BFD implementations speak to each other, there is a possibility of two sides not being able to find a common value for the interval to run ...
متن کاملBidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane proc...
متن کاملFast Failure Detection in Multipoint Networks
Bridged Ethernet and IP routing and forwarding are without any doubt the most deployed network technologies, mainly because of their robust, low-cost and easy-to-deploy-character. Solutions to provide fast recovery over these technologies are thus a highly desired feature. Fast recovery not only needs a fast switchover (e.g. using IPFastReRoute), but also requires fast failure detection. Howeve...
متن کاملRFC 5884 BFD for MPLS
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane proc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- RFC
دوره 7130 شماره
صفحات -
تاریخ انتشار 2014