Validation of PROBA-V GEOV1 and MODIS C5 & C6 fAPAR Products in a Deciduous Beech Forest Site in Italy
نویسندگان
چکیده
The availability of new fAPAR satellite products requires simultaneous efforts in validation to provide users with a better comprehension of product performance and evaluation of uncertainties. This study aimed to validate three fAPAR satellite products, GEOV1, MODIS C5, and MODIS C6, against ground references to determine to what extent the GCOS requirements on accuracy (maximum 10% or 5%) can be met in a deciduous beech forest site in a gently and variably sloped mountain site. Three ground reference fAPAR, differing for temporal (continuous or campaign mode) and spatial sampling (single points or Elementary Sampling Units—ESUs), were collected using different devices: (1) Apogee (defined as benchmark in this study); (2) PASTIS; and (3) Digital cameras for collecting hemispherical photographs (DHP). A bottom-up approach for the upscaling process was used in the present study. Radiometric values of decametric images (Landsat-8) were extracted over the ESUs and used to develop empirical transfer functions for upscaling the ground measurements. The resulting high-resolution ground-based maps were aggregated to the spatial resolution of the satellite product to be validated considering the equivalent point spread function of the satellite sensors, and a correlation analysis was performed to accomplish the accuracy assessment. PASTIS sensors showed good performance as fAPARPASTIS appropriately followed the seasonal trends depicted by fAPARAPOGEE (benchmark) (R2 = 0.84; RMSE = 0.01). Despite small dissimilarities, mainly attributed to different sampling schemes and errors in DHP classification process, the agreement between fAPARPASTIS and fAPARDHP was noticeable considering all the differences between both approaches. The temporal courses of the three satellite products were found to be consistent with both Apogee and PASTIS, except at the end of the summer season when ground data were more affected by senescent leaves, with both MODIS C5 and C6 displaying larger short-term variability due to their shorter temporal composite period. MODIS C5 and C6 retrievals were obtained with the backup algorithm in most cases. The three green fAPAR satellite products under study showed good agreement with ground-based maps of canopy fAPAR at 10 h, with RMSE values lower than 0.06, very low systematic differences, and more than 85% of the pixels within GCOS requirements. Among them, GEOV1 fAPAR showed up to 98% of the points lying within Remote Sens. 2017, 9, 126; doi:10.3390/rs9020126 www.mdpi.com/journal/remotesensing Remote Sens. 2017, 9, 126 2 of 28 the GCOS requirements, and slightly lower values (mean bias = −0.02) as compared with the ground canopy fAPAR, which is expected to be only slightly higher than green fAPAR in the peak season.
منابع مشابه
Validation of GMES Geoland-2 global biophysical variables (GEO VERSION1) products
This study investigates the scientific quality of the first version of global biophysical products (FCover, LAI, FAPAR) developed in the Geoland-2 /BioPar Core Mapping Service, namely GEOV1. These products based on SPOT/VEGETATION data were built on MODIS and CYCLOPES products while reconciling their differences. The quality assessment strategy follows the CEOS/WGCV Land Product Validation guid...
متن کاملValidation of MODIS and GEOV1 fPAR Products in a Boreal Forest Site in Finland
Remote sensing of the fraction of absorbed Photosynthetically Active Radiation (fPAR) has become a timely option to monitor forest productivity. However, only a few studies have had ground reference fPAR datasets containing both forest canopy and understory fPAR from boreal forests for the validation of satellite products. The aim of this paper was to assess the performance of two currently ava...
متن کاملEvaluation of MODIS LAI/FPAR Product Collection 6. Part 2: Validation and Intercomparison
The aim of this paper is to assess the latest version of the MODIS LAI/FPAR product (MOD15A2H), namely Collection 6 (C6). We comprehensively evaluate this product through three approaches: validation with field measurements, intercomparison with other LAI/FPAR products and comparison with climate variables. Comparisons between ground measurements and C6, as well as C5 LAI/FPAR indicate: (1) MOD...
متن کاملValidation of the Meris Fapar L2 Products against Independent Estimates Derived from the Modis and Misr Surface Albedo Operational Products
We present and evaluate results of a validation study of the MERIS Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) product delivered by the operational MGVI algorithm. Our approach is based on the application of an inversion method conducted using both MODIS and MISR derived broadband visible and nearinfrared surface albedo products available during a full seasonal cycle over a...
متن کاملRetrieval of Leaf Area Index (LAI) and Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) from VIIRS Time-Series Data
Long-term high-quality global leaf area index (LAI) and fraction of absorbed photosynthetically active radiation (FAPAR) products are urgently needed for the study of global change, climate modeling, and many other problems. As the successor of the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor, the Visible Infrared Imaging Radiometer Suite (VIIRS) will continue to provide global ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Remote Sensing
دوره 9 شماره
صفحات -
تاریخ انتشار 2017