Hopping peak height algorithm for a one legged robot hopping height control

نویسندگان

  • A. H. Azahar
  • S. H. Chong
  • A. M. Kassim
چکیده

This paper presents the hopping peak height algorithm in controlling the hopping height of a one legged hopping robot. The hopping mechanism produces continuous and rhythmic pattern. The continuous and rhythmic pattern behaviors produce oscillation feedback to the closed loop system and continuously produce oscillation error to the controller. Therefore, hopping peak height algorithm is designed and embedded into the closed loop control system feedback to determine the hopping peak of each produced hopping as a feedback. The existence of the hopping peak height algorithm assists the PI-CPG controller to converge the hopping height error approximately to zero.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fast and Adaptive Hopping Height Control of Single-legged Robot

Research on running robots has generally focussed on the steady-state. When the ground has limited foot placement surfaces or there are sudden changes in height then steady-state running is not possible. It becomes necessary to make step-bystep adjustments to place the foot. In this paper a mass-spring-damper model of a robot’s leg is used to develop a hopping controller capable of meeting rapi...

متن کامل

Height Control for a One-Legged Hopping Robot using a Two-Dimensional Model

This paper describes a model-based height controller for a one-legged hopping robot. Equations of motion in two dimensions (i.e. the sagittal plane) are developed. These equations are solved and numerically integrated to produce an actuator command that will allow the robot to regulate its apex height.

متن کامل

Control of Hopping Height for a One-Legged Hopping Machine

The control of the hopping height in a one-legged machine is studied. The general aim is to decrease sensitivity of the hopping height to drifts in the machine’s parameters. The proposed approach combines a near-inverse controller which uses height feedback, with a recursive least-squares parameter estimator which continually tunes the controller. The paper presents the mechanical design of the...

متن کامل

The SAHR Setup - Controlling Hopping Speed and Height Using a Single Actuator

In this paper we present and experimentally validate a control method for regulating both the forward speed and the apex height of a one legged hopping robot, using only a single actuator. The control method is based on a dynamic model of the hopping robot and makes use of the dynamic coupling of the vertical and forward motions of the robot. The control is applied first to a simulated model of...

متن کامل

Height Control for a One-Legged Hopping Robot using a One-Dimensional Model

The hopping machine considered in this paper is like a pogo-stick; it has a small foot and a leg spring. Unlike a pogo-stick which uses a mechanical spring, the spring for the hopper is pneumatic. The controller is based on Raibert’s three-part control system [1]. Raibert controlled hopping height by delivering a specified thrust value during stance. This paper describes a model-based height co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015