Replication of butterfly wing and natural lotus leaf structures by nanoimprint on silica sol-gel films.
نویسندگان
چکیده
An original and low cost method for the fabrication of patterned surfaces bioinspired from butterfly wings and lotus leaves is presented. Silica-based sol-gel films are thermally imprinted from elastomeric molds to produce stable structures with superhydrophobicity values as high as 160 degrees water contact angle. The biomimetic surfaces are demonstrated to be tuned from superhydrophobic to superhydrophilic by annealing between 200 degrees C and 500 degrees C.
منابع مشابه
Glass nanostructures fabricated by soft thermal nanoimprint
An one-step, fast and potential low cost process has been developed to fabricate silica like glass nanostructures by combining sol-gel chemistry and thermal nanoimprint. An inorganic-organic sol-gel thin film is patterned at low pressure and temperature with flexible stamps. Various geometries are achieved with a patterning resolution of about 150 nm and patterns aspect ratio higher than 4. To ...
متن کاملNew Sol-Gel Solution with 45 Days Stability for Preparation Silica Thin Films
As we know sol-gel is one of the most important techniques for thin film preparation. In this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. The prepared sol was stable for 45 days which is very important to characterize the coating process. The optical properties as a function of aging time, withdrawal rate, and he...
متن کاملNanopatterning of photonic crystals with a photocurable silica–titania organic–inorganic hybrid material by a UV-based nanoimprint technique
UV patternable high refractive index inorganic–organic hybrid materials prepared by sol–gel process can be nanoimprinted in order to get photonic crystal nanopatterns. Non-hydrolytic sol–gel process can make a UV curable and relatively high refractive index hybrid material, which can be cured without a significant shrinkage for nanoimprinting. Sol–gel process of heterogeneously functionalized s...
متن کاملHydrophilicity of Silica Nano-Porous Thin Films: Calcination Temperature Effects
In this research work, silica nano-porous thin films were deposited on glass substrates by layer by layer method. The thin films were calcinated at various calcination temperatures (200, 300, 400, and 500 °C). The morphology, surface characteristics, surface roughness and hydrophilic properties of the thin films were investigated by field emission scanning electron microscopy, attenuated total ...
متن کاملApplication of Taguchi design for optimization of corrosion behavior of amorphous silica thin film deposited through sol-gel dipping technique
Amorphous silica thin films were applied on the 316L stainless steel substrates by sol-gel dipping technique. The starting chemicals (TEOS, ethanol, HCl, PEG, and NaOH) were used to prepare a gel and then deposited on a substrate. The microstructure, topography, corrosion behavior, and surface hardness were investigated using SEM, AFM, electrochemical method, and micro-hardness measurements. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Bioinspiration & biomimetics
دوره 3 4 شماره
صفحات -
تاریخ انتشار 2008