Site preference and effect of alloying on elastic properties of ternary B2 NiAl-based alloys
نویسندگان
چکیده
منابع مشابه
Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying
Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...
متن کاملThe effect of alloying on the properties of (Nb,Ti)Cr2 C15 Laves phases
The effect of composition on the ternary (NbCr2–TiCr2) C15 phase properties has been investigated, focusing upon the defect structure, elastic properties, and mechanical behavior. The C15 phase field is continuous between NbCr2–TiCr2, with a maximum phase field width of at least 7 at.% solubility. The defect mechanism is governed by anti-site constitutional defects for all alloys. Mechanically,...
متن کاملFirst principles calculations of the effect of Pt on NiAl surface energy and the site preference of Pt
Pt-modified NiAl is widely used as a coating material in industry. In this study, the surface energies of NiAl with and without Pt are investigated using first-principles calculations. The presence of Pt in NiAl takes the surface electronic states to higher energies, resulting in an increased surface energy, which explains some of the beneficial effects of Pt on the oxidation resistance of NiAl...
متن کاملProduction and Characterization of Nano Crystalline Fe85Si10Ni5 Soft Magnetic Alloys by Mechanical Alloying
Abstract There are various methods to produce iron based nano crystalline magnetic alloys. Among these methods, mechanical alloying is one of the most important. In this research, nano crystalline Fe85Si10Ni5 soft magnetic alloy was synthesized by mechanical alloying. The effect of alloying time on phase constituents and magnetic properties of the produced powders was investigated, by X-ray di...
متن کاملPhysical metallurgy of nickel aluminides
A description of the important physical metallurgy aspects of Ni3Al and NiAl encompassing structure, crystallographic defects, slip systems and phase stability has been presented in this article. The microstructures generated in the two alloys by conventional as well as novel processing techniques have been discussed. The effect of alloying additions on the microstructure has been enumerated. B...
متن کامل