IEEE Standard Test Access Port and Boundary-Scan Architecture
ثبت نشده
چکیده
Circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards is defined. The circuitry includes a standard interface through which instructions and test data are communicated. A set of test features is defined, including a boundary-scan register, such that the component is able to respond to a minimum set of instructions designed to assist with testing of assembled printed circuit boards. Also, a language is defined that allows rigorous description of the component-specific aspects of such testability features.
منابع مشابه
IEEE Standard Test Access Port and Boundary-Scan Architecture
Circuitry that may be built into an integrated circuit to assist in the test, maintenance, and support of assembled printed circuit boards is defined. The circuitry includes a standard interface through which instructions and test data are communicated. A set of test features is defined, including a boundary-scan register, such that the component is able to respond to a minimum set of instructi...
متن کاملGeneralizing Access to Instrumentation Embedded in a Semiconductor Device
In the 1980s—the early days of circuit boards—most failures were due to poor solder joints on the boards, imperfections among board connections, or problems with the bonds and bond wires from integrated circuit (IC) pads to pin lead frames. The Joint Test Action Group (JTAG) formed in 1985 to provide a pins-out view from one IC pad to another so these faults could be examined. The eventual resu...
متن کاملSynchronizing the IEEE 1149.1 Test Access Port for Chip-Level Testability
testability standard in the industry. Although its mandatory provisions focus narrowly on boardlevel assembly verification testing, primarily via the boundary-scan register, its test access port (TAP) and many optional provisions make the standard usable for a much broader range of applications. Since its inception, numerous extensions and applications have been proposed that allow the standard...
متن کاملSecure JTAG Implementation Using Schnorr Protocol
The standard IEEE 1149.1 (Test Access Port and Boundary-Scan Architecture, also known as JTAG port) provides a useful interface for embedded systems development, debug, and test. In an 1149.1-compatible integrated circuit, the JTAG port allows the circuit to be easily accessed from the external world, and even to control and observe the internal scan chains of the circuit. However, the JTAG por...
متن کاملImplementation of IEEE 1687 Standard for Access Instrumentation Using Verilog
Technology in VLSI industry has improved in accordance with moore’s law , so density of transistor in Integrated Circuit(IC) is increased . Testing this IC with the bed of nail technique becomes very difficult so solution to this was given by IEEE 1149.1 boundary scan standard also called as Joint Test Access Group(JTAG) using which interconnects between the IC mounted on PCB was tested without...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001