A High Reliability Study of the Scroll Compressor
نویسندگان
چکیده
A fundamental study of the improvements made ~o the scroll compressor's reliability is presented. It has been found that the tilting of the main shaft significantly reduces the journal bearing's performance. For this reason, a new bearing system has been developed. Compression of the liquid refrigerant causes high pressure within the compression chambers and this can lead to the scroll wrap breaking. A method to reduce this high pressure has been investigated and a new pressure relief mechanism has been developed.
منابع مشابه
Experimental Study on an Inverter-Driven Scroll Compressor with an Injection System
For an inverter-driven compressor, the discharge temperature increased with a rise of frequency. Therefore, it is necessary to control the discharge temperature at high frequencies in order to obtain system reliability and efficiency. This paper describes the effects of an injection system on the perfonnance of an inverter-driven scroll compressor. As results of the present work, the refrigeran...
متن کاملDevelopment of Large Capacity CO2 Scroll Compressor
CO2 refrigerant with a high operating pressure has a large difference between the suction and discharge pressures in compressors. Because of a load increase, the high performance and high reliability of compressors are required. Compared to the scroll compressor employing the conventional refrigerant, the thrust load increases in the CO2 scroll compressor. Therefore the design of thrust bearing...
متن کاملHigh Performance Scroll Compressor With Liquid Refrigerant Injection
Improvement of compressor efficiency using the alternative refrigerant is demanded strongly to reduce CO2 emission, which causes the global warming. Especially the compressor using in frozen temperature level has long lifetime, and the correspondence to above-mentioned is one of the most important subjects. The scroll compressor is the promising structure to solve this problem. A technical poin...
متن کاملA Research of Scroll Compressor Working Process Computer Simulation and Testing
Thi~ paper is baaed on the working principle of scroll compressor and after investigating the ga~ flow condition, in especial analysis the gas leaking situation between two scroll parts mutual gearing, which influence the compressor performance very much. The working process calculating model is set up, employ the soroll compressor geometric parameter, size~ error of parts manufactured as well ...
متن کاملDevelopment of High Performance 3D Scroll Compressor
This paper describes the efficiency improvement technology of the 3D scroll compressors and the development of 3D scroll compressor for commercial air-conditioner. 3D scroll, our newly developed profile, can compress refrigerant not only radially but also axially. Therefore, higher compression ratio, higher reliability and larger capacity are obtained by introducing 3D scroll. Since the 3D scro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014