Adiabaticity criterion and the shortest adiabatic mode transformer in a coupled-waveguide system.
نویسندگان
چکیده
By analyzing the propagating behavior of the supermodes in a coupled-waveguide system, we have derived a universal criterion for designing adiabatic mode transformers. The criterion relates epsilon, the fraction of power scattered into the unwanted mode, to waveguide design parameters and gives the shortest possible length of an adiabatic mode transformer, which is approximately 2/piepsilon1/2 times the distance of maximal power transfer between the waveguides. The results from numerical calculations based on a transfer-matrix formalism support this theory very well.
منابع مشابه
Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملPlasmon mode transformation in modulated-index metal-dielectric slot waveguides.
The concept of adiabatic mode transformation between silicon waveguide and surface plasmon-polariton modes in subwavelength metal-dielectric slots is investigated. The mode transformer consists of a modulated-index slot region, which is bound by two metal slabs. Using the design scheme, we will show that the optical dispersion of a modulated-index metal slot waveguide can be engineered well abo...
متن کاملModal conversion with artificial materials for photonic-crystal waveguides.
We study adiabatic mode transformations in photonic-crystal integrated circuits composed of a triangular lattice of holes etched into a planar waveguide. The taper relies on the manufacture of holes with progressively-varying dimensions. The variation synthesizes an artificial material with a gradient effective index. Calculations performed with a three-dimensional exact electromagnetic theory ...
متن کاملAccurate Analysis of Dielectric Backed Planar Conducting Layers of Arbitrarily Shaped in a Rectangular Waveguide
The characteristics of dielectric backed planar conducting layers of arbitrarily shaped in a rectangular waveguide are calculated by means of coupled integral equation technique (CIET) which accurately takes higher order mode interactions. Equivalent structures for the accurate analysis whole structure are introduced in which magnetic surface currents are identified as the unknowns at the apert...
متن کاملAdiabatic coupling between conventional dielectric waveguides and waveguides with discrete translational symmetry.
We study adiabatic transformation in optical waveguides with discrete translational symmetry. We calculate the reflection and transmission coefficient for a structure consisting of a slab waveguide that is adiabatically transformed into a photonic crystal waveguide and then back into a slab waveguide. The calculation yields high transmission over a wide frequency range of the photonic crystal w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics letters
دوره 34 3 شماره
صفحات -
تاریخ انتشار 2009