Rare-earth surface alloying: a new phase for GdAu2.

Effect of Rare Earth Elements on the Sorption Characteristics of Nanostructured Zr-base Sinter Porous Getter Prepared by Mechanical Alloying

The effect of rare earth (RE) elements, including Ce and La, on the sorption properties of Zr-Co getters was investigated in this work. The phase evolution, microstructural characteristics of getter powders were studied by means of X-ray diffraction method, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The nanostructured Zr3Co intermetallic compound has been...

Mechanical activation of phosphate concentrates to enhance dissolution efficiency of rare earth elements from a kinetic viewpoint

The Esfordi phosphate concentrate mainly contains fluorapatite, monazite, and xenotime as rare earth element (REE) minerals, accounting for 1.5% of rare earth metals. The monazite and xenotime minerals are refractory and their decomposition is only possible at high temperatures. Thus mechanical activation was used in the present work for this purpose. After 90 minutes of mechanical activation, ...

Rare Earth Metals as Alloying Components in Magnesium Implants for Orthopaedic Applications

SURFACE HARDENING OF TUNGSTEN-BASED HEAVY ALLOY VIA PACK BORONIZING

The boronizing of a tungsten heavy alloy containing Ni and Fe as the major alloying elements were performed in the present study to increase its surface hardening. Pack cementation method was employed as a well-known, successful solid-state process for boronizing. The coating treatment was accomplished at different temperatures of 1000, 1050 and 1100°C for 6 and 9 hours. The formation of tu...

Microstructure and performance of rare earth element-strengthened plasma-facing tungsten material

Pure W and W-(2%, 5%, 10%) Lu alloys were manufactured via mechanical alloying for 20 h and a spark plasma sintering process at 1,873 K for 2 min. The effects of Lu doping on the microstructure and performance of W were investigated using various techniques. For irradiation performance analysis, thermal desorption spectroscopy (TDS) measurements were performed from room temperature to 1,000 K v...