Optimization of Preparation Conditions for Lysozyme Nanoliposomes Using Response Surface Methodology and Evaluation of Their Stability.

نویسندگان

  • Zhipan Wu
  • Rongfa Guan
  • Fei Lyu
  • Mingqi Liu
  • Jianguo Gao
  • Guozou Cao
چکیده

The main purpose of this study was to optimize the preparation of lysozyme nanoliposomes using response surface methodology and measure their stability. The stabilities of lysozyme nanoliposomes in simulated gastrointestinal fluid (SGF), simulated intestinal fluid (SIF), as well as pH, temperature and sonication treatment time were evaluated. Reverse-phase evaporation method is an easy, speedy, and beneficial approach for nanoliposomes' preparation and optimization. The optimal preparative conditions were as follows: phosphatidylcholine-to-cholesterol ratio of 3.86, lysozyme concentration of 1.96 mg/mL, magnetic stirring time of 40.61 min, and ultrasound time of 14.15 min. At the optimal point, encapsulation efficiency and particle size were found to be 75.36% ± 3.20% and 245.6 nm ± 5.2 nm, respectively. The lysozyme nanoliposomes demonstrated certain stability in SGF and SIF at a temperature of 37 °C for 4 h, and short sonication handling times were required to attain nano-scaled liposomes. Under conditions of high temperature, acidity and alkalinity, lysozyme nanoliposomes are unstable.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigation of the Effect of Gammaoryzanol Addition on the Properties of the Nanoliposomes by using Response Surface Methodology: Preparation, Characterization and Optimization

Liposomes are the most important lipid-based nanocarriers, which are used for encapsulation of both hydrophilic and hydrophobic active compounds. The aim of this study was to investigate the effect of Gammaoryzanol (GO) addition to lipid bilayers on characteristics of liposomes prepared by a modified ethanol injection method. The GO bearing nanoliposomes were prepared with different molar ratio...

متن کامل

Optimization of Parameters that Affect the Activity of the Alkaline Protease from Halotolerant Bacterium, Bacillus acquimaris VITP4, by the Application of Response Surface Methodology and Evaluation of the Storage Stability of the Enzyme

Background: It was previously shown that the activity of a serine protease from a moderately halotolerant Bacillus aquimaris VITP4 strain is active in a wide range of pH and temperatures and could be modulated by the presence of the divalent metal ions.  Objectives: In the present study, a quantitative analysis was done in order to explore the parameters that are contributing to the protease a...

متن کامل

Hydophilic polypropylene microporous membrane for using in a membrane bioreactor system and optimization of preparation conditions by response surface methodology

In this study, the response surface methodology (RSM) based on the central composite design (CCD) was used to optimize the preparation condition of polypropylene-grafted maleic anhydride (PP-g-MA) microporous membrane by thermally-induced phase separation (TIPS) method. A mixture of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) was used as diluent. The effect of polymer composition and qu...

متن کامل

Roasting Process Optimization of Walnut Kernels for the Preparation of Walnut Cream Using Response Surface Methodology

Roasting has considerable effects on the quality of cream made of nuts. In this study, the roasting conditions of walnut kernels were optimized based on the stability parameters of the produced cream. Temperatures of 100-150°C for 10-30 minutes were used to roast walnut kernels. The amount of oil separation, peroxide, acidity and Thiobarbituric acid values of the cream, as well as color paramet...

متن کامل

Optimization and kinetic evaluation of acid blue 193 degradation by UV/peroxydisulfate oxidation using response surface methodology

The optimization of process conditions for the degradation of Acid Blue 193 by UV/peroxydisulfate was investigated using response surface methodology (RSM). The effects of four parameters namely initial K2S2O8 concentration, UV irradiation, temperature, and initial dye concentration on two process responses, color removal and the rate constants of the first-order kinetic equations, were investi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Molecules

دوره 21 6  شماره 

صفحات  -

تاریخ انتشار 2016