Conception of a 3D Metamaterial-Based Foundation for Static and Seismic Protection of Fuel Storage Tanks
نویسندگان
چکیده
Fluid-filled tanks in tank farms of industrial plants can experience severe damage and trigger cascading effects in neighboring tanks due to large vibrations induced by strong earthquakes. In order to reduce these tank vibrations, we have explored an innovative type of foundation based on metamaterial concepts. Metamaterials are generally regarded as manmade structures that exhibit unusual responses not readily observed in natural materials. If properly designed, they are able to stop or attenuate wave propagation. Recent studies have shown that if locally resonant structures are periodically placed in a matrix material, the resulting metamaterial forms a phononic lattice that creates a stop band able to forbid elastic wave propagation within a selected band gap frequency range. Conventional phononic lattice structures need huge unit cells for low-frequency vibration shielding, while locally resonant metamaterials can rely on lattice constants much smaller than the longitudinal wavelengths of propagating waves. Along this line, we have investigated 3D structured foundations with effective attenuation zones conceived as vibration isolation systems for storage tanks. In particular, the three-component periodic foundation cell has been developed using two common construction materials, namely concrete and rubber. Relevant frequency band gaps, computed using the Floquet–Bloch theorem, have been found to be wide and in the low-frequency region. Based on the designed unit cell, a finite foundation has been conceived, checked under static loads and numerically tested on its wave attenuation properties. Then, by means of a parametric study we found a favorable correlation between the shear stiffness of foundation walls and wave attenuation. On this basis, to show the potential improvements of this foundation, we investigated an optimized design by means of analytical models and numerical analyses. In addition, we investigated the influence of cracks in the matrix material on the elastic wave propagation, and by comparing the dispersion curves of the cracked and uncracked materials we found that small cracks have a negligible influence on dispersive properties. Finally, harmonic analysis results displayed that the conceived smart foundations can effectively isolate storage tanks.
منابع مشابه
Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method
Dynamic behavior of ground supported cylindrical storage tanks (CST) is of crucial importance because of its applications in industrial complexes. Seismic behavior of tanks is greatly affected by the height to diameter ratio, fluid height and fluid type. Five CSTs with different height to diameter ratios, three CSTs with the same height and diameters but various fluid heights and one CST with t...
متن کاملSeismic Analysis of Rectangular Concrete Tanks by Considering Fluid and Tank Interaction
Many liquid storage tanks around the world have affected by earthquakes. This structure can store dangerous chemical liquids. Hence dynamic behavior of ground supported rectangular storage tanks is very important due to their applications in industrial facilities. In current research, the seismic behavior of two water storage rectangular concrete tanks is examined. For this purpose, these tanks...
متن کاملEstimation of Sloshing Wave Height in Broad Cylindrical Oil Storage Tanks Using Numerical Methods
Cylindrical steel tanks are important components of many industrial plants such as oil refineries and chemical plants. Usually failure of cylindrical tanks leads to serious consequences. During the past earthquakes such as 1964 Alaska and 1999 Turkey seismic performance of cylindrical tanks revealed that tanks are seismically vulnerable. Therefore, evaluation of seismic performance of these str...
متن کاملA Comparison between Different Editions of API650 Seismic Provisions for Cylindrical Steel Storage Tanks Considering the Fragility Curves
Seismic safety of liquid storage tanks is of considerable importance due to its application in different industries. In Iran, most of these storage tanks are designed based on API650 code provisions. Despite designing tanks according to API standard, the lesson learned from previous earthquakes, shows different kind of damage occurring on them. This study is an investigation on evaluating diffe...
متن کاملضریب اطمینان در تحلیل پایداری شیروانیها تحت اثر بار متمرکز
In this paper, stability of slopes with a shallow foundation located on top including the shape of the failure mechanism is investigated in static and seismic states. This is a three dimensional problem which is analyzed two dimensionally because 3D analyses are complex and appropriate softwares are not available. The conventional method of bearing capacity evaluation of foundations on top of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017