Calibrating and Testing New Ultracam Sensors
نویسندگان
چکیده
This contribution reports on the latest design of new UltraCam sensors. We present results from calibration and verification flights of the UltraCam Condor, which is based on a specific design and offers highest productivity from its 38000 pixel cross track image format. UltraCam Condor is based on the successful project experience with its predecessor, the UltraCam G.
منابع مشابه
Performance of Nondestructive Sonic Echo Testing Method on Partially Dismantled Unknown Wood Bridge Foundations; A Case Study
Sonic Echo (SE) testing method is a well-known, versatile method to gather information pertaining to unknown bridge foundations. Many studies on the applicability and methodology improvement of SE tests to evaluate individual piles and foundations supporting the superstructure have been reported previously. However, there is a rare opportunity for obtaining the performance of SE tests without t...
متن کاملFdtd Analysis of Rectangular Waveguide in Receiving Mode as Emi Sensors
Testing electronic equipment for radiated emissions requires the accurate calibration of EMI sensor. The performance of the sensor depends on its Antenna Factor (AF), which is the ratio of the incident electric field on the antenna surface to the received voltage at the load end across 50 Ω resistance. The theoretical prediction of the AF of EMI sensors is a very attractive alternative if one t...
متن کاملOblique Image Collection -- Challenges and Solutions
For over a decade now oblique images are collected from airborne platforms on a regular basis. Several camera products have been presented from distinct camera vendors and their image products are well known. The UltraCam Osprey is the new oblique sensor by Microsoft / UltraCam Business Unit and was introduced into the market at the ASPRS 2013. This camera combines a metric nadir subsystem crea...
متن کاملCalibrating a 4-wheel mobile robot
When a mobile robot is constructed the odometry must be calibrated. Calibrating a 4-wheel robot requires the accurate measurement of steering angle as well as translation and rotation. Some measurements are made with a tape measure and some with ultrasonic sensors. The measurements are used to determine the parameters of the odometry calibration matrix and the steering kinematic model. A proced...
متن کاملA New Calibration Method for Commercial RGB-D Sensors
Commercial RGB-D sensors such as Kinect and Structure Sensors have been widely used in the game industry, where geometric fidelity is not of utmost importance. For applications in which high quality 3D is required, i.e., 3D building models of centimeter‑level accuracy, accurate and reliable calibrations of these sensors are required. This paper presents a new model for calibrating the depth mea...
متن کامل