Optical, thermal, and electrical monitoring of radio-frequency tissue modification.

Radio Frequency ‘Sutureless’ Fistulotomy: An Effective Modification of the Conventional Technique

Effect Of Zinc Oxide RF Sputtering Pressure on the Structural and Optical Properties of ZnO/PEDOT:PSS Inorganic/Organic Heterojunction

Zinc oxide nanostructures are deposited on glass substrates in the presenceof oxygen reactive gas at room temperature using the radio frequency magnetronsputtering technique. In this research, the effects of zinc oxide sputtering pressure on thenanostructure properties of the deposited layer are investigated. The deposition pressurevaries from 7.5 to 20.5 mTorr. AFM resu...

Effect of Nonlinear Phase Variation in Optical Millimetre Wave Radio over Fibre Systems

In this paper, we propose an optical millimetre wave radio-over-fibre (mm-wave RoF) system that uses a dual drive Mach Zehnder modulator (DD-MZM), which is biased at the maximum transmission biasing point, to generate an optical double sideband-suppressed carrier. The input to the DD-MZM are binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), 8-phase shift keying (8-PSK) and...

Modeling of RF Waves in Free Space Optical Communication System Under Gamma-Gamma Turbulent Channel Effect

In this paper, an enhancement design of communication system using optical radio frequency (RF) waves in free space optical communication (FSO) system is presented. To our knowledge, it is the first time that the effect of Gamma-Gamma turbulent channel model on the performance of the proposed system is analyzed and simulated. To obtain an optical communication system with good performance and h...

Signal Optimization During Radio Links Between a Transmitter and a Receiver Located in Adjacent Material Media with Differing Optical Densities (TECHNICAL NOTE)

Signal optimization is affected during radio links between a transmitter and a receiver located in adjacent material media with differing optical densities. The optimization is carried out via the automated control theory method. The radio signal obtained after the optimization is coordinated with the two media's electrical characteristics simultaneously; and this enables low power and small an...