Ex Vivo Anatomical Characterization of Handsewn or Stapled Jejunocecal Anastomosis in Horses by Computed Tomography Scan

The aim of this study is to compare handsewn and stapled jejunocecal anastomosis with different stomal lengths in terms of anatomical differences. Group 1 underwent a two-layer handsewn jejunocecal side-to-side anastomosis (HS); Group 2 received a stapled jejunocecal side-to-side anastomosis (GIA). Each group was divided into two subgroups (HS80 and HS100, GIA80 and GIA100). Specimens were inflated and CT scanned. The stomal/jejunal area ratio and blind end pouch volume/area were measured and compared. Effective length of the stoma was measured and compared with the initial length. Stomal/jejunal area ratio was 1.1 for both 80 techniques, 1.6 for the GIA100, and 1.9 for the HS100 technique. Both HS and GIA techniques produced a blind end pouch and exhibited a mean increase of the final stomal length ranging from 6 to 11% greater than the original stomal length. All techniques will exhibit a length increase of the final stomal length compared to the intended stomal length, with a consequent increase in stomal area. Stapled techniques consistently produced a large distal blind end pouch. Length of a jejunocecal anastomosis should be selected in accordance with the diameter of afferent jejunum, and the 80 mm stomal length could be deemed sufficient in horses.