Direct Torque Control for Reduction of Torque Ripple during Commutations Using B4-inverter
نویسنده
چکیده
This paper deals with the Direct Torque Control (DTC) of Brushless DC (BLDC) motor drives fed by four-switch inverters (also known as B4inverters) rather than six-switch inverters (also known as B6 inverters) in conventional drives. The principle of operation of the BLDC motor is firstly recalled considering both cases of B6and B4-inverters in the armature, with emphasis on the twoand three-phase conduction modes The B4-inverter could be regarded as a reconfigured topology of the B6-inverter in case of a switch/leg failure which represents a crucial reliability benefit for many applications especially in electric and hybrid propulsion systems. Keywords-Direst Torque control, Brushless DC, Conventional drives, Three phase conduction.
منابع مشابه
Torque Control of Brushless Direct Current Motor Drives Using Single Current Sensor with High Reliability
Due to the simple structure, high torque density, low maintenance, and high efficiency, brushless direct current (BLDC) motors are widely used in automation and industrial applications. A control strategy based on single current sensor is proposed for a four-switch three-phase BLDC motor system to lower cost and improve reliability. The whole working process of the BLDC motor is divided into si...
متن کاملA Novel Method for Commutation Torque Ripple Reduction of Four-Switch, Three-Phase Brushless DC Motor Drive
This paper presents an original study on the generated torque ripples of phase commutation in the Four-Switch, Three-Phase Inverter (FSTPI) Brushless DC (BLDC) motor drive which is suitable for low cost applications. Analytic values of torque ripple and commutation duration are obtained for different operation conditions. Moreover, limitation on the speed range operation caused from splitti...
متن کاملOptimal Sensorless Four Switch Direct Power Control of BLDC Motor
Brushless DC (BLDC) motors are used in a wide range of applications due to their high efficiency and high power density. In this paper, sensorless four-switch direct power control (DPC) method with the sector to sector commutations ripple minimization for BLDC motor control is proposed. The main features of the proposed DPC method are: (1) fast dynamic response (2) easy implementation (3) use o...
متن کاملRipple Reduction in Direct Torque and Flux Control of Induction Motors via Sliding Modes
This paper presents a torque ripple reduction approach to direct torque and flux control (DTFC) of an induction motor using a sliding-mode control (SMC) technique. A distinctive feature of the approach is that, by appropriately parametrizing and implementing the sliding-mode controller, the discontinuous nature of the actuator may be directly incorporated to the design process. The present pape...
متن کاملReduction of Current , Flux and Torque Ripple Contents of Dtc for an Induction Motor Drive by Using Pi and Ann Controller
Three-level neutral-point-clamped (NPC) inverters are very appropriate for high-power adjustable-speed drive applications. Direct torque control is characterized by the merits of fast response, simple structure and strong robustness to motor parameters variations. This paper presents a 3-level inverter-fed direct torque controlled (DTC) induction motor (IM) drive based on optimized switching ta...
متن کامل