Capillary threads and viscous droplets in square microchannels
نویسندگان
چکیده
We experimentally study the formation and evolution of threads containing more viscous liquids surrounded by less viscous, immiscible liquids through hydrodynamic focusing in square microchannels. Over a large range of viscosities and interfacial tensions, five characteristic regimes of flow behavior are identified: threading, jetting, dripping, tubing, and displacement. We locate the boundaries between these regimes on a flow map based on the capillary number of each fluid. In the jetting and the dripping regimes, the droplet size is measured and related to fluid properties, flow parameters, and geometry. The critical thread length before jetting droplets and the critical length of a viscous tail before breakup in dripping are also examined. This study classifies and defines regimes of thread instabilities that can be used to produce supraand subchannel size viscous droplets in an elementary microfluidic geometry. © 2008 American Institute of Physics. DOI: 10.1063/1.2911716
منابع مشابه
Effects of viscosity on droplet formation and mixing in microfluidic channels
This paper characterizes the conditions required to form nanoliter-sized droplets (plugs) of viscous aqueous reagents in flows of immiscible carrier fluid within microfluidic channels. For both non-viscous (viscosity of 2.0 mPa s) and viscous (viscosity of 18 mPa s) aqueous solutions, plugs formed reliably in a flow of water-immiscible carrier fluid for Capillary number less than 0.01, although...
متن کاملConstraints on the adhesion of viscous threads spun by orb-weaving spiders: the tensile strength of glycoprotein glue exceeds its adhesion.
In this study we tested the hypothesis that a viscous thread releases its hold on a surface because its glycoprotein glue pulls from the surface and not because its elongating droplets break near their attachment to the surface. We compared the values obtained when three species' viscous threads adhered to four smooth surfaces, which differed in their total surface energy and in the proportions...
متن کاملDroplet Formation by Confined Liquid Threads inside Microchannels
A confined liquid thread can form monodisperse droplets near the exit of a microchannel, provided the continuous phase is able to enter the microchannel. A general model that accurately predicts the droplet size including the breakup position inside the microchannel is presented and is verified with experimental observations; breakup occurs as long as the capillary number (Ca) of the liquid thr...
متن کاملAdhesive recruitment by the viscous capture threads of araneoid orb-weaving spiders.
The sticky prey capture threads of orb-webs are critical to web performance. By retaining insects that strike the web, these spirally arrayed threads allow a spider time to locate and subdue prey. The viscous capture threads spun by modern orb-weaving spiders of the Araneoidea clade replaced the dry, fuzzy cribellar capture threads of the Deinopoidea and feature regularly spaced moist, adhesive...
متن کاملFormation of Arrayed Droplets by Soft Lithography and Two-Phase Fluid Flow, and Application in Protein Crystallization.
This paper presents an overview of our recent work on the use of soft lithography and two-phase fluid flow to form arrays of droplets. The crucial issues in the formation of stable arrays of droplets and alternating droplets of two sets of aqueous solutions include the geometry of the microchannels, the capillary number, and the water fraction of the system. Glass capillaries could be coupled t...
متن کامل