Digital Low Level Rf
نویسنده
چکیده
The demand on high stability and precision on the RF voltage for modern accelerators, as well as better diagnostics, maintenance and flexibility is driving the community to develop Digital Low Level RF systems (DLLRF) for both linear accelerators and synchrotrons. The state of the art in digital technologies applied to DLLRF systems is reviewed; different designs developed or in development at various laboratories are surveyed.
منابع مشابه
FPGA Implementation of a Hammerstein Based Digital Predistorter for Linearizing RF Power Amplifiers with Memory Effects
Power amplifiers (PAs) are inherently nonlinear elements and digital predistortion is a highly cost-effective approach to linearize them. Although most existing architectures assume that the PA has a memoryless nonlinearity, memory effects of the PAs in many applications ,such as wideband code-division multiple access (WCDMA) or orthogonal frequency-division multiplexing (OFDM), can no longer b...
متن کاملA New Digital Control System for Cesr-c and the Cornell Erl
M. Liepe , S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, LEPP, Cornell University, Ithaca, NY 14853, USA Abstract Recent progress in developing digital low-level RF controls for accelerators has made digital systems an option of choice. At Cornell we are presently working on two projects: upgrading the RF controls of the Cornell Electron Storage Ring (CESR) for charm-tau operation (CESR-...
متن کاملReconfigurable RF Systems Using Commercially Available Digital Capacitor Arrays
Various RF circuit blocks implemented by using commercially available MEMS digital capacitor arrays are presented for reconfigurable RF systems. The designed circuit blocks are impedance-matching network, tunable bandpass filter, and VSWR sensor. The frequency range of the designed circuits is 0.4-4GHz. The MEMS digital capacitor arrays that are employed in the designs have built-in dc-to-dc vo...
متن کاملArchitecture and Performance of the PEP-II Low-Level RF System*
Heavy beam loading in the PEP-II B Factory along with large ring circumferences places unique requirements upon the low-level RF (LLRF) system. RF feedback loops must reduce the impedance observed by the beam while ignoring the cavity transients caused by the ion clearing gap. Special attention must be placed on the cavity tuner loops to allow matching the ion clearing gap transients in the hig...
متن کاملDirty RF: A New Paradigm InvitedPaper
The implementation challenge for new low-cost low-power wireless modem transceivers has continuously been growing with increased modem performance, bandwidth, and carrier frequency. Up to now we have been designing transceivers in a way that we are able to keep the analog (RF) problem domain widely separated from the digital signal processing design. However, with today’s deep sub-micron techno...
متن کامل