Slag material’s proportion optimised by polynomial regression
نویسنده
چکیده
Jin Wang MSc Student, School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China Aizhi Sun Associate Professor, School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China Qian Gao PhD Professor, School of Civil and Environment Engineering, University of Science and Technology Beijing, Beijing, China Fuqiang Zhai MSc Student, School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China Shen Wu PhD Student, School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China Alex A. Volinsky PhD Professor, Department of Mechanical Engineering, University of South Florida, Tampa, FL, USA
منابع مشابه
Optimised phosphorus removal technology for small-scale wastewater treatment by combining metallurgical slags
Different ways of combining argon oxygen decarburisation slag (AOD) or electric arc furnace slag (EAF) with blast furnace slag (BFS) for achieving better phosphorus (P) removal performance in small-scale wastewater systems (SSWSs) were examined. The three types of slag were combined in varying mass ratios and with different dosing procedures in batch experiments using synthetic solution and rea...
متن کاملTreatment of drainage water with industrial by-products to prevent phosphorus loss from tile-drained land.
Tile drained land with phosphorus (P)-rich topsoil is prone to P loss, which can impair surface water quality via eutrophication. We used by-products from steel and energy industries to mitigate P loss from tile drains. For each by-product, P sorption maximum (P(max)) and strength (k) were determined, while a fluvarium trial assessed P uptake with flow rate. Although two ash materials (fly ash ...
متن کاملSynthesis of Ammonium Dinitramide by Nitration of Potassium and Ammonium Sulfamate. The Effect of Sulfamate Conterion on ADN Purity
Nitration of potassium sulphamate was carried out using a mixture of sulphuric and nitric acid at -30 °C. The reaction time was optimized at the mole ratio of sulphuric to nitric acid of (1:3.5). The difference in product yield by changing the potassium to ammonium sulphamate was studied throughly. It was found that both the yield and purity of the product is better starting with potassium ...
متن کاملEvaluation of the Cooling and Pavement Performance of Basic Oxygen Furnaces Slag Used in Asphalt Mixture
The basic oxygen furnace slag (BOF) was wide used in road construction, but there was a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA) containing stone mastic asphalt (SMA), porous asphalt (PA) and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag ...
متن کاملEvaluation of the Cooling and Pavement Performance of Basic Oxygen Furnace Slag Used in Asphalt Mixture
Basic oxygen furnace slag (BOF) is widely used in road construction, but there is a lack of characteristics in different asphalt mixtures. This study investigates the properties of hot-mixed asphalt (HMA), containing stone mastic asphalt (SMA), porous asphalt (PA), and dense-graded BOF as a partial substitution for natural aggregates. The purpose of this study is to evaluate various BOF slag co...
متن کامل