A critical comparison on biocompatibility of different phases of sol - gel derived calcium phosphates as bone graft materials
نویسندگان
چکیده
Calcium Phosphate cement has been the subject of intense investigation over the past few years. This study compares difference in biocompatibility between the three main phases of Ca-P, namely Hydroxyapatite, Dicalcium phosphate and β-Tricalcium phosphate. It involves composite preparation followed by cell test. Material parameters were stoichiometry (Hydroxyapatite with Ca-P ratio of 1.67, Dicalcium phosphate with Ca-P ratio of 1.0, β-Tricalcium phosphate with Ca-P ratio of 1.50) and crystallographic structure and arrangement. The Composites in concern were produced by mixing PVA (polyvinyl alcohol) and Ca-P in equal fraction. Cell test was performed for 24 h and 7 days. Biocompatibility analysis was performed both qualitatively and quantitatively. XRD, FTIR, SEM and TEM were used to analyse materials at various stages of the research. All calcium phosphate composites were biocompatible with cells. Hydroxyapatite ceramic expressed highest biocompatibility followed by Dicalcium phosphate and β-Tricalcium phosphate after 24 h cell test, whereas, after the 7-days test biocompatibility of Dicalcium phosphate was comparable to Hydroxyapatite. This study shows that Dicalcium phosphate is a better alternative to Hydroxyapatite, where biodegradation is crucial for patients’ recovery.
منابع مشابه
Investigation and comparison of calcium aluminate phases obtained by three methods of sol-gel (with EDTA), sol-gel (without EDTA) and solid-phase synthesis
In this study, we investigate calcium aluminate phases that were prepared by three different solid phase synthesis methods and a sol-gel method (with and without EDTA). The purpose of this study is to compare these three methods in terms of achieving higher purity, optimal phase and complexity in the production of the final product. Comparing the results, we found that the sol-gel method is mo...
متن کاملSol-Gel Synthesis, in vitro Behavior, and Human Bone Marrow-Derived Mesenchymal Stem Cell Differentiation and Proliferation of Bioactive Glass 58S
Background: Bioactive glasses 58S, are silicate-based materials containing calcium and phosphate, which dissolved in body fluid and bond to the bone tissue. This type of bioactive glass is highly biocompatible and has a wide range of clinical applications. Methods: The 58S glass powders were synthesized via sol-gel methods, using tetraethyl orthosilicate, triethyl phosphate, and calcium nitrate...
متن کاملInvestigation of the effective factors on manufacturing calcium phosphates prototypes using 3D printing
Calcium phosphate ceramics has been widely used in the present due to their chemical similarity to bone and good biocompatibility in the physiological environmental and a compatibility with synthetic and natural polymers Recent advancements in additive manufacturing have enabled the fabrication of 3D prototypes with controlled architecture resembling the natural bone. Binder jetting is a versat...
متن کاملChemical Preparation of Beta Calcium Sulfate Hemihydrate Granules with a Special Particle Size as Bone Graft Material
Introduction: Beta calcium sulfate hemihydrate (BCSH), which is commonly known as “Gypsum plaster” has long been used as bone graft material because of its excellent biocompatibility and the ability for bone regeneration. Several methods have been used for the preparation of BCSH, including heat treatment of calcium sulfate dihydrate with water, application of inorganic acids or condensed inorg...
متن کاملSol-Gel Derived Titania Coating on Titanium Substrate
The synthesis of titania via sol-gel method has been widely studied. In the present work, titania was deposited onto a titanium substrat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015