The influence of immersion and presence in early stage engineering designing and building
نویسندگان
چکیده
Daniela Faas School of Applied Science and Engineering Harvard University Cambridge, MA USA Qifang Bao Department of Mechanical Engineering Massachusetts Institute of Technology Cambridge, MA USA Daniel D. Frey Department of Mechanical Engineering and Engineering Systems Division Massachusetts Institute of Technology Cambridge, MA USA Maria C. Yang Department of Mechanical Engineering and Engineering Systems Division Massachusetts Institute of Technology Cambridge, MA USA
منابع مشابه
Influence of Temperature and Moisture on the Compressive Strength of Carbon Fiber Reinforced Polymers
The effect of moisture absorption and high temperature on the compressive strength of unidirectional IM7/977-2 carbon/epoxy resins have been investigated experimentally. The specimens were divided into 4 groups, and tested under 4 different conditions by varying the testing temperature and moisture parameters. The fiber orientation selected were 0o, ±45o and 90o...
متن کاملThe production of lexical categories (VP) and functional categories (copula) at the initial stage of child L2 acquisition
This is a longitudinal case study of two Farsi-speaking children learning English: ‘Bernard’ and ‘Melissa’, who were 7;4 and 8;4 at the start of data collection. The research deals with the initial state and further development in the child second language (L2) acquisition of syntax regarding the presence or absence of copula as a functional category, as well as the role and degree of L1 influe...
متن کاملAdsorption of Fluconazole Drug on Silica Aerogel by Immersion Method and Investigation of the Rate and Mechanism of Drug Release
In this study, adsorption of fluconazole on silica aerogel was performed successfully by the immersion method in the 1% solution of fluconazole-ethanol at the ambient condition and without using the supercritical method. The hydrophobic and hydrophilic silica aerogels were synthesized by the two-stage sol-gel method and dried at the ambient temperature. This method had most of drug loading at 2...
متن کاملFuzzy Method in Feasibility Study of Using Biomass Solar Hybrid Source and Photovoltaic System for Designing a Research Center Building in Smart Grid of Hamedan
In this paper, the electrical consumption of a Research Center Building is derived of the bills, Then with defining of fuzzy Bus Thermal Coefficient objective function for heating, the amount of available heat selling to Research Center Building consumer that is produced by Biomass Solar Hybrid Source is calculated. With the capacity determination of Biomass Solar Hybrid Source to provide Therm...
متن کاملNumerical study of heat gradient and crossing energy to around building walls containing phase change materials in Kashan temperature conditions
The application of phase change materials (PCM) in the variant parts of building because of the high capacity these materials, lead to an improvement in temperature conditions and reduction in energy consumption. Due to the high dependency of the performance of these materials to the ambient temperature fluctuations, their applications in climates with extreme temperature fluctuations has a sig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- AI EDAM
دوره 28 شماره
صفحات -
تاریخ انتشار 2014