A Positive Buck-boost Converter Controlled by Digital Combination of Buck and Boost Converters to Improve the Output Transients
نویسنده
چکیده
This project is a highly efficient and novel control strategy for improving the transients in the output voltage of a dc–dc positive buck–boost converter which is required for low-power portable electronic applications. The proposed control technique can regulate the output voltage for variable input voltage (higher, lower, or equal to the output voltage). There are several existing solutions to these problems, and selecting the best approach involves a tradeoff among cost, efficiency, and output noise or ripple. In the proposed method, instead of instantaneous transition from buck to boost mode, intermediate combination modes consisting of several buck modes followed by several boost modes are utilized to distribute the voltage transients. This is unique of its kind from the point of view of improving the efficiency and ripple content in the output voltage. Keywordsbuck–boost converter, dc–dc
منابع مشابه
A New Structure of Buck-Boost Z-Source Converter Based on Z-H Converter
In this paper, a new structure for buck-boost Z-source converter based on Z-H topology is proposed. The proposed converter consists of two LC networks similar to the conventional Z-source and Z-H converters. One of the characteristics of the proposed structure is that, without any changing in its’ power circuit, it can be used in different conversions such as dc/dc, dc/ac and ac/ac. This unique...
متن کاملI-A Modulated Digitally Controlled Non-Inverting Buck-Boost Converter for WCDMA RF Power Amplifiers
This paper focuses on the non-inverting buckboost converter supplying an adjustable DC voltage to a WCDMA RF power amplifier (RFPA) in order to improve the system efficiency under different transmitted RF power levels. It is shown that precise output voltage positioning and low output voltage ripple over a wide output voltage range, including buck, boost and buck/boost transition modes, can be ...
متن کاملSimulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching
A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...
متن کاملBuck-Boost PWM Converters Having Two Independently Controlled Switches
1 This work is supported by Philips Research, Briarcliff Manor, NY, through Colorado Power Electronics Center Abstract – Single-switch step-up/step-down converters, such as the buck-boost, SEPIC and Cuk, have relatively high voltage and current stresses on components compared to the buck or the boost converter. A buck-boost converter with two independently controlled switches can work as a boos...
متن کاملAnalysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کامل