Configurations of low-contact services

نویسندگان

  • Rohit Verma
  • Scott T. Young
چکیده

This study uses a cluster analysis procedure to develop a classification model of low-contact services based on seven operations objectives. The effectiveness of the classification scheme is tested by demonstrating the link between the objectives, competitive priorities, and performance. This study also identifies eight underlying factors of competitive priorities in low-contact services. Furthermore, discriminant analysis on competitive priority dimensions shows that low-contact services consist of multiple groups and therefore should not be lumped into one group in any analysis scheme. q 2000 Elsevier Science B.V. All rights reserved.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Experimental Study on Geogrid with Geotextile Effects Aimed to Improve Clayey Soil

The increase of shear strength in soil, reinforced with the geogrid (alternate reinforcer), is resulted from an increase of modulus of soil hardness, and also from the tensile strength of reinnforcer. The shear strength of contact surface in soil appears due to both the friction strength against the contact surface, and the passive strength formed in front of the elements of the geogri...

متن کامل

Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters

Typically two configurations are used for energy harvesting with different advantages: piezoelastic and piezomagnetoelastic. Best performance of the piezoelastic configuration is when the excitation frequency is close to the resonance frequency. If the input frequency slightly deviates from the natural frequency, the generated power is severely decreased. To tackle the problem, the piezomagneto...

متن کامل

Numerical analysis of low velocity impact on ceramic-metal-composite targets

In the present paper, the problem of low velocity impact of plates made from different configurations of ceramic, aluminum, steel and composite (S-glass polyester) is analyzed numerically using  Abaqus finite element software. The projectile is assumed to be a rigid body with a hemispherical head. Also, for ceramic layers, Holmquist constitutive model, for aluminum and steel layers, Johnson Coo...

متن کامل

Farmers’ Knowledge and Perception regarding Privatization and Commercialization of Agricultural Extension Services in Delta State, Nigeria

This study examined the knowledge and perception of farmers regarding privatization and commercialization of agricultural extension services in Delta State, Nigeria. A sample size of 90 farmers in contact with extension agents was randomly selected for the study. Data for the study was collected through the use of a validated structured interview schedule. Both descriptive and inferential stati...

متن کامل

Three-component Distillation Columns Sequencing: Including Configurations with Divided-wall Columns

In the present work, the exergy analysis and economic study of 3 different samples of threecomponent mixtures have been investigated (ESI>1, ESI≈1, and ESI<1). The feed mixture has been tested under three different compositions (low, equal, and high contents of the intermediate component). A quantitative comparison between simple and complex configurations, considering thermally coupled, thermo...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000