Single Phase Converters for Power Factor Correction with Tight Output Voltage Regulation

نویسندگان

  • K. Umamaheswari
  • V. Venkatachalam
چکیده

The flyback converter type single-stage converter and a half wave rectifier with time-multiplexing control (TMC) for power factor correction is proposed. It has the advantage of better magnetic core utilization and better performance for high power applications. The major portion of the input is transferred to the load through ac-dc conversion. And the part of the input power is delivered to the auxiliary output through the flyback conversion and stored in the capacitor. The voltage ripple of the main output can also be reduced. With TMC the power processes can be achieved by single transformer to reduce the cost and the size of the converter. The simulation result of the proposed converter presents, simplicity, high power factor with low cost and size.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New Pulsating Power Elimination Method for Single-Phase PWM AC/DC Converters with Minimum Voltage and Current Stress

An inherent problem of single-phase rectifiers is the existence of a pulsating portion in the input power, which pulsates at twice the grid frequency. If this pulsating power is transferred to the DC-link, it causes a significant amount of second-order harmonic at the output voltage. Since in many applications, such a high level of DC oscillation is not acceptable, so the pulsating power must b...

متن کامل

An Improvement of Predictive Control for Single Phase Voltage Fed Power Factor Correction Converters

Harmonic contamination and low power factor in power systems caused by power converters have been a great concern. The effect of harmonics in current due to lagging power factor are the increase in current flow in the capacitors which results in additional heating of the capacitors and reduce its life, increased magnitudes of neutral currents in three phase systems, over-heating in transformers...

متن کامل

Three-Phase to Single-Phase Matrix Converters: New Topology Based on New Control Method

In this paper, a new topology is proposed for three-phase to single-phase matrix converters, where more voltage levels are produced in the output in comparison with the conventional topologies. In addition, a new control method based on minimum error between the generated and the desired output voltages is proposed for three-phase to single-phase matrix converters. In the proposed control metho...

متن کامل

An Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor

Multiple output DC-DC converters are widely used in many applications such as aerospace, industrial and medical equipments. The purpose of this paper is to present an intelligent control system for the multiple output DC-DC converters. In order to perform this purpose, a double ended forward DC-DC converter with three output voltages (+5 V/ 50W, +15 V/ 45W and -15 V/ 15W) is considered and anal...

متن کامل

Circuit theory of power factor correction in switching converters

This paper discusses the circuit theory aspects of power factor correction in switching converter circuits. The discussion begins with an examination of the requirement of power factor correction in dc=dc converters. Using the concept of zero-order converter circuits, su cient conditions for a dc=dc converter circuit to provide power factor correction are derived. The duality principle is appli...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013