Ordered and ultrathin reduced graphene oxide LB films as hole injection layers for organic light-emitting diode
نویسندگان
چکیده
In this paper, we demonstrated the utilization of reduced graphene oxide (RGO) Langmuir-Blodgett (LB) films as high performance hole injection layer in organic light-emitting diode (OLED). By using LB technique, the well-ordered and thickness-controlled RGO sheets are incorporated between the organic active layer and the transparent conducting indium tin oxide (ITO), leading to an increase of recombination between electrons and holes. Due to the dramatic increase of hole carrier injection efficiency in RGO LB layer, the device luminance performance is greatly enhanced comparable to devices fabricated with spin-coating RGO and a commercial conducting polymer PEDOT:PSS as the hole transport layer. Furthermore, our results indicate that RGO LB films could be an excellent alternative to commercial PEDOT:PSS as the effective hole transport and electron blocking layer in light-emitting diode devices.
منابع مشابه
Improved hole-injection contact for top-emitting polymeric diodes
Articles you may be interested in Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons Appl. Efficient inverted top-emitting organic light-emitting diodes using ultrathin MoO 3 / C 60 bilayer structure to enhance hole injection Appl. Tuning hole injection and charge recombination with self-assembled monolayer on silver anode in top-emitting organic light-...
متن کاملMetal Oxide Induced Charge Transfer Doping and Band Alignment of Graphene Electrodes for Efficient Organic Light Emitting Diodes
The interface structure of graphene with thermally evaporated metal oxide layers, in particular molybdenum trioxide (MoO3), is studied combining photoemission spectroscopy, sheet resistance measurements and organic light emitting diode (OLED) characterization. Thin (<5 nm) MoO3 layers give rise to an 1.9 eV large interface dipole and a downwards bending of the MoO3 conduction band towards the F...
متن کاملExtremely efficient flexible organic light-emitting diodes with modified graphene anode
Although graphene films have a strong potential to replace indium tin oxide anodes in organic light-emitting diodes (OLEDs), to date, the luminous efficiency of OLEDs with graphene anodes has been limited by a lack of efficient methods to improve the low work function and reduce the sheet resistance of graphene films to the levels required for electrodes1–4. Here, we fabricate flexible OLEDs by...
متن کامل47.2: Hole Injection and Power Efficiency of Organic Light Emitting Diodes with Ultra-thin Inorganic Buffer Layer on Indium Tin Oxide
ITO capped with a variety of ultra-thin metal layers such as platinum, manganese, nickel, gold, lead, magnesium, and nonmetal layer such as, carbon, gallium, silicon, has been used as hole-injecting anode in organic light-emitting diodes consisting of CuPc/TPD/Alq3. Enhancement in hole injection but not current nor power efficiencies have been obtained in devices with metalcapped ITO, regardles...
متن کاملDependence of the Current and Power Efficiencies of Organic Light-Emitting Diode on the Thickness of the Constituent Organic Layers
The dependence of the current and power efficiencies of bi-layer organic light-emitting diodes (OLEDs) on the thickness of the constituent organic layers is reported. The thickness of the electron and hole transport layers was simultaneously varied to determine the optimal configuration for power efficiency. It was verified that the inclusion of a suitable electrode buffer layer reduced the eff...
متن کامل