The effects of pressurized partial pressure suits on operational ergonomics ¬リニ

نویسندگان

  • Huimin Hu
  • Li Ding
  • Alan Hedge
  • Xianxue Li
  • Chunguang Zhang
  • Zhifeng Qin
  • Huajun Xiao
چکیده

A study on capstan partial pressure suits (PPSs) was conducted to determine their effects on pilots' operational performance on a series of ergonomic measures at different pressure levels using objective and subjective approaches. Tests of range of motion, operational performance and operational strength were carried out on ten male subjects wearing PPSs under 6 different pressure conditions. Subjective tests related to pressure tolerance and operational performance were also conducted. A video-based motion capture and analysis system was used to record the trajectories of body motions. Analysis of variance was used to test the effects of the different pressures. It was concluded that a pressurized PPS had a significant impact on the pilot's range of motion (ROM) and operational performance, but no significant effect on their operational strength. Range of motion and operational performance decreased as pressure increased, but they were affected differently. The results may provide mission planners, suit designers and human factors engineers with better insight into the understanding of pilots' operational function, mobility and strength capabilities when wearing pressurized PPS. Relevance to industry: This paper presents pilots' range of motion, operational performance and operational strength with pressurized PPS dressed and can help mission planners, suit designers and human factors engineers to improve PPS' performance. © 2014 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimizing the physical ergonomics indices for the use of partial pressure suits.

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a ...

متن کامل

Materials and Textile Architecture Analyses for Mechanical Counter-Pressure Space Suits using Active Materials

Mechanical counter-pressure (MCP) space suits have the potential to improve the mobility of astronauts as they conduct planetary exploration activities. MCP suits differ from traditional gas-pressurized space suits by applying surface pressure to the wearer using tight-fitting materials rather than pressurized gas, and represent a fundamental change in space suit design. However, the underlying...

متن کامل

A Pitch-Catch Based Online Structural Health Monitoring of Pressure Vessels, Considering Corrosion Formation

Structural health monitoring is a developing research field which is multifunctional and can estimate the health condition of the structure by data analyzing and also can prognosticate the structural damages. Illuminating the damages by using piezoelectric sensors is one of the most effective techniques in structural health monitoring. Pressurized equipments are very important components in pro...

متن کامل

Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance

A polypropylene microporous membrane (PPMM) was fabricated by thermally induced phase separation (TIPS) method. The effects of protein size and structure as well as filtration pressure on the membrane performance and fouling mechanisms were investigated using two different proteins, bovine serum albumin (BSA) and collagen, in dead-end filtration setup. Obtained results showed that, for each pro...

متن کامل

Displacements and Stresses in Pressurized Thick FGM Cylinders with Varying Properties of Power Function Based on HSDT

Using the infinitesimal theory of elasticity and analytical formulation, displacements and stresses based on the high-order shear deformation theory (HSDT) is presented for axisymmetric thick-walled cylinders made of functionally graded materials under internal and/or external uniform pressure. The material is assumed to be isotropic heterogeneous with constant Poisson’s ratio and radially varyi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015