Research On The Properties Of Rotary Compressor Vane Coating
نویسندگان
چکیده
منابع مشابه
Compressor with Turning-Paired Vane and Piston
With the aim of developing a method for reducing energy consumption of room air conditioners, we address a higher-efficiency design of the rotary compressor currently most used worldwide. We focused on a new rotary compressor equipped with a mechanism to restrict the rolling motion of the piston, and performed a dynamics analysis. The new rotary compressor has a small pillar at the tip of the v...
متن کاملVane Dynamics Analysis of a Tilted Vane Rotary Compressor
An analytical model of vane dynamics in a tilted vane rotary compressor is presented. With the geometric relationship of the vane in a tilted slot, and the roller, the kinetic equations were derived for evaluating the reciprocating inertial force of the vane, and the chamber volume equations were obtained for calculating pressure history inside the compression chamber. The empirical friction co...
متن کاملWear-Less Technology for Rotary Compressor Using CO2 Refrigerant
We have developed a new CO2 heat pump water heater compressor with a single rotary mechanism in practical use for the first time in the world. CO2 refrigerant doesn't destroy the ozone layer, and the global warming potential (GWP) is less than 1/1000 in comparison to hydro-fluorocarbon refrigerants. However the operating pressure of CO2 refrigerant is approximately three times as high as that o...
متن کاملInvestigation of a Variable Rotary Compressor Using a Vane Control Method
It is well known that the compressor with variable capacities has a higher efficiency than the typical single capacity compressors for the air-conditioner system. Therefore, many compressor makers are trying to develop variable types of capacity-controlling compressors, one of which is a vane locking controlled rotary compressor. This paper investigates the rotary compressor using a vane contro...
متن کاملImprovement Of Abnormal Wear Between The Vane-slot And Vane In Rotary Compressor
The reason for the abnormal wear between the vane-slot and the vane in the rotary compressor is analyzed in this paper. Firstly, the influence of lubrication at the clearance, the machining equipment accuracy and oil circulation (oil flow rate) is analyzed. Then the material characteristics including the hardness of the vane and vane-slot, the surface treatment of the vane and the deformation o...
متن کامل