Monitoring of Drill System Behavior for Water-Powered In-The-Hole (ITH) Drilling
نویسندگان
چکیده
A detailed understanding of the drilling system and the drilling control is required to correctly interpret rock mass conditions based on monitored drilling data. This paper analyses data from hydraulic in-the-hole (ITH) drills used in LKAB’s Malmberget mine in Sweden. Drill parameters, including penetration rate, percussive pressure, feed pressure, and rotation pressure, are monitored in underground production holes. Calculated parameters, penetration rate variability, rotation pressure variability, and fracturing are included in the analysis to improve the opportunity to predict rock mass conditions. Principal component analysis (PCA) is used to address non-linearity and variable interactions. The results show that the data contain pronounced hole length-dependent trends, both linear and step-wise linear, for most parameters. It is also suggested that monitoring can be an efficient way to optimize target values for drill parameters, as demonstrated for feed force. Finally, principal component analysis can be used to transfer a number of drill parameters into single components with a more straightforward geomechanical meaning.
منابع مشابه
Online Dimensional Controlling System for Drilling
The drilling is well known as one of the most common hole making processes in the industry.Due to close tolerance requirement for drilled holes in the most of work pieces, onlinecontrolling of the diameter of drilled holes seems to be necessary. In the current work, an onlinedimensional controlling system was developed for drilling process. Doing this, drilling processwas executed in different ...
متن کاملInvestigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation
Analysis of the drilling fluid temperature due to heat transfer of drilling fluid with the formation in under-balanced drilling operation is the main objective of this study. Gas-liquid two-phase flow model considering thermal interaction with the formation is used to numerically simulate a well with real dimensions. In the present study, the continuity, momentum, and energy equations are devel...
متن کاملDRILL WEAR PREDICTION SYSTEM USING OF MOTOR CURRENT AND FUZZY LOGIC METHOD
In automation flexible manufacturing systems, tool wear detection during the cutting process is one of the most important considerations. This study presents an intelligent system for online tool condition monitoring in drilling process .In this paper, analytical and empirical models have been used to predict the thrust and cutting forces on the lip and chisel edges of a new drill. Also an empi...
متن کاملFEM investigation of drilling conditions on heat generation during teeth implantation
Abstract The first step of implanting teeth is to drill a hole in the jaw bone. Excessive temperature produced during drilling is one of the destructive factors for bony tissue. If the temperature generation during surgical drilling exceeds the critical temperature, it could lead to osteonecrosis. This research intends to study drilling parameters such as drilling speed, feed rate, cooling con...
متن کاملارزیابی تحلیل حرارتی عددی سوراخکاری استخوان فک در جراحی مرتبط با کاشت ایمپلنت
Background and Aims: Optimization drilling parameters in order to temperature decrease during creation of hole in the bone is an interested issue. The aim of this study was to achieve optimum values of drilling parameters based on the creation of minimum temperature during jawbone drilling. Materials and Methods: In this study two models of mandible and maxilla was created and teeth 2, 5...
متن کامل