On-line Phase Space Measurement with Kicker Excitation
نویسندگان
چکیده
A new method for on-line phase space measurements with kicker excitation at COSY was developed. The position data were measured using the analog output of two beam position monitors (BPMs) and directly monitored on a digital storage oscilloscope with an external clock (bunch-synchronous sampling). Nonlinear behavior of the proton beam was visible as well as were resonance islands. Typical measurements are presented.
منابع مشابه
Lattice Function Measurements in the Fermilab Accumulator Ring
The betatron phase advance between two points in a storage ring can be very accurately determined from a transverse beam transfer function measurement with DC beam. The phase advance can be determined from the difference in the phase response between an upper betatron sideband (N+Q line) and a lower betatron sideband (N-Q line) in an open loop network analyzer measurement between a kicker and a...
متن کاملDesign Concept for Ags Injection Kicker
Knoxville, May 16–20 May 2005 DESIGN CONCEPT FOR AGS INJECTION KICKER UPGRADE TO 2 GEV* R.B. Armenta, M.J. Barnes, E.W Blackmore, O. Hadary, G.D. Wait, TRIUMF, Vancouver, B.C., L. Ahrens, C.J. Gardner, W. Zhang, Brookhaven National Laboratory, Upton, NY Abstract The present AGS injection kickers at A5 location were designed for 1.5 GeV proton injection. Recent high intensity runs have pushed th...
متن کاملParticle Simulation of Darht-ii Downstream Transport
The DARHT-II beamline utilizes a fast stripline kicker to temporally chop a high current electron beam from a single induction LINAC and deliver multiple temporal electron beam pulses to an x-ray converter target. To obtain a high quality radiographic measurement requires that high beam quality be maintained throughout the transport line from the end of the accelerator through the final focus l...
متن کاملELECTRIC AND MAGNETIC DESIGN OF THE g-2 MAGNETIC KICKER
The ultra-high precision g-2 experiment requires a fast kicker to deflect incoming muon beam with a momentum of 3.094 Gev/c. A magnetic kicker was selected since this approach requires the lowest excitation voltage of all designs considered. However, a higher driving current (>6000A) is required which leads to more residual eddy current field to influence the main dipole magnetic field. Several...
متن کاملRHIC Injection Kicker Impedance
The RHIC injection kicker is a pulsed transmission line kicker, consisting of 15 ferrite sections and 14 ceramic sections. The length of the kicker is 1.1 m and there are 4 such units in each ring. Figure 1 shows the kicker cross section with the outer conductor, C-shaped ferrite, inner conductor and the ceramic beam pipe [1]. The design characteristic impedance of the transmission line kicker ...
متن کامل