Using the DS28CZ04 in an Active Copper SFP Cable Assembly - AN3890
ثبت نشده
چکیده
This document is a supplement to the HFRD-16.0 reference design, 1Gbps to 4.25Gbps Active Copper SFP Cable Assembly. It shows how to use the DS28CZ04 as an SFP serial-control interface in active copper SFP cable assemblies. The reader is advised to obtain a copy of the reference design to understand details beyond the scope of this document.
منابع مشابه
ISSCC 2011 / SESSION 25 / CDRs & EQUALIZATION TECHNIQUES / 25 . 7 25 . 7 A 10 Gb / s Half - UI IIR - Tap Transmitter in 40 nm CMOS
Two commercially important standards for 10Gb/s serial data transfer include the SFI specification, associated with SFP+ optical modules and copper twinaxial cable [1], and the 10GBASE-KR specification for backplane channels in computer servers and networking equipment [2]. The SFI specification requires the transmitter to operate with both low data-dependent jitter (DDJ) and low transmitter wa...
متن کاملImproved nanofluid cooling of cylindrical lithium ion battery pack in charge/discharge operation using wavy/stair channels and copper sheath
Abstract: In order to improve the thermal management system for cooling an electric vehicle battery pack, the thermal performance of the battery pack in two states of charge and discharge in different working conditions by using a copper sheath around the batteries and a copper sheath, as well as a stair channel on top of the battery pack and using of nanofluid as cooling fluid, has been studie...
متن کاملCharacterization and Application of SO3H-functionalized Phthalimide (SFP) as an Efficient and Recyclable Catalyst for the Solvent-free Synthesis of 2-Amino-4H-chromenes
In this research, SO3H-functionalizedphthalimide (SFP) has been prepared through simple reaction of phthalimide with chlorosulfonic acid, and characterized using FT-IR, 1H NMR, 13C NMR, SEM (scanning electron microscopy), mass and TG (thermal gravimetric) spectra. Afterward, the solid acid has been utilized as an efficient, green, heterogeneous and recyclable ca...
متن کاملDesign, Simulation and implementation of active dual-band dipole antenna using a series stub
In this paper, a new method for designing an active dual-band dipole antenna is proposed. The operating frequencies of the proposed antenna are 150 and 450 MHz that are usually used in military applications. Using a series stub is the main idea in the proposed dual-band antenna, where it makes an independent resonance frequency higher than the main resonance frequency of a conventional dipole. ...
متن کاملAn experimental study of axial load transfer mechanisms of cable bolts using axially split embedment apparatus
The load transfer mechanisms of cable bolts differ from those for normal rebar bolts. The cable bolts used in mines are basically steel strands with different constructions depending on the number of wires or elements and the way they are laid. Tendon bolts (rebar and cable) are normally evaluated for their strength and load transfer properties. The tendon strength can be evaluated by the tensi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006