Long, low loss etched As(2)S(3) chalcogenide waveguides for all-optical signal regeneration.
نویسندگان
چکیده
We report on the fabrication and optical properties of etched highly nonlinear As(2)S(3) chalcogenide planar rib waveguides with lengths up to 22.5 cm and optical losses as low as 0.05 dB/cm at 1550 nm - the lowest ever reported. We demonstrate strong spectral broadening of 1.2 ps pulses, in good agreement with simulations, and find that the ratio of nonlinearity and dispersion linearizes the pulse chirp, reducing the spectral oscillations caused by self-phase modulation alone. When combined with a spectrally offset band-pass filter, this gives rise to a nonlinear transfer function suitable for all-optical regeneration of high data rate signals.
منابع مشابه
Optical loss reduction in high-index-contrast chalcogenide glass waveguides via thermal reflow.
A thermal reflow technique is applied to high-index-contrast, sub-micron waveguides in As(2)S(3) chalcogenide glass to reduce the sidewall roughness and associated optical scattering loss. We show that the reflow process effectively decreases sidewall roughness of chalcogenide glass waveguides. A kinetic model is presented to quantitatively explain the sidewall roughness evolution during therma...
متن کاملMid-infrared characterization of solution-processed As2S3 chalcogenide glass waveguides.
An etch-free and cost-effective deposition and patterning method to fabricate mid-infrared chalcogenide glass waveguides for chemical sensing applications is introduced. As(2)S(3) raised strip optical waveguides are produced by casting a liquid solution of As(2)S(3) glass in capillary channel molds formed by soft lithography. Mid-IR transmission is characterized by coupling the output of a quan...
متن کاملLow-loss chalcogenide waveguides on lithium niobate for the mid-infrared.
We demonstrate low-loss chalcogenide (As(2)S(3)) waveguides on a LiNbO(3) substrate for the mid-IR wavelength (4.8 μm). Designed for single-mode propagation, they are fabricated through photolithography and dry-etching technology and characterized on a mid-IR measurement setup with a quantum cascade laser. For straight waveguides, propagation loss as low as 0.33 dB/cm is measured and low-loss b...
متن کاملTerabaud Optical Sampling on a Chalcogenide Optical Chip
We demonstrate terabaud optical sampling by combining four-wave mixing in a chalcogenide chip with a long wavelength carbon nanotube modelocked fiber laser. System resolution is 320 fs, 150 fs lower than previous systems. OCIS codes: 130.3120: Integrated optics devices , 060.4510: Optical communications Optical sampling using optical switching allows for high baudrate signal monitoring beyond t...
متن کاملChalcogenide glass waveguides integrated with quantum cascade lasers for on-chip mid-IR photonic circuits.
We demonstrate on-chip hybrid integration of chalcogenide glass waveguides and quantum cascade lasers (QCLs). Integration is achieved using an additive solution-casting and molding method to directly form As(2)S(3) strip waveguides on an existing QCL chip. Integrated As(2)S(3) strip waveguides constructed in this manner display strong optical confinement and guiding around 90° bends, with a NA ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics express
دوره 15 22 شماره
صفحات -
تاریخ انتشار 2007