Numerical Studies on Locally Damped Structures
نویسنده
چکیده
In the JLC/NLC X-band linear collider, it is essential to reduce the long-range dipole wakefields in the accelerator structure to prevent beam break up (BBU) and emittance degradation. The two methods of reducing the long-range wakefields are detuning and damping. Detuning reduces the wakefields rapidly as the dipole modes de-cohere but, with a finite number of modes, the wakefield will grow again as the modes re-cohere. In contrast, damping suppresses the wakefields at a longer distance. There are two principal damping schemes: synchronous damping using HOM manifolds such as that used in the RDDS1 structure and local damping similar to that used in the CLIC structure. In a locally damped scheme, one can obtain almost any Q value, however, the damping can have significant effects on the accelerating mode. In this paper, we present a medium local-damping scheme where the wakefields are controlled to meet the BBU requirement while minimizing the degradations of the fundamental rf parameters. We will address the load design and pulse heating issues associated with the medium damping scheme.
منابع مشابه
COMPARING NUMERICAL METHODS FOR THE SOLUTION OF THE DAMPED FORCED OSCILLATOR PROBLEM
In this paper, we present a comparative study between the Adomian decomposition method and two classical well-known Runge-Kutta and central difference methods for the solution of damped forced oscillator problem. We show that the Adomian decomposition method for this problem gives more accurate approximations relative to other numerical methods and is easier to apply.
متن کاملOn the Behavior of Damped Quasi-Newton Methods for Unconstrained Optimization
We consider a family of damped quasi-Newton methods for solving unconstrained optimization problems. This family resembles that of Broyden with line searches, except that the change in gradients is replaced by a certain hybrid vector before updating the current Hessian approximation. This damped technique modifies the Hessian approximations so that they are maintained sufficiently positive defi...
متن کاملAnalytical approach of buckling strength of yielding damped braced core (YDBC)
Abstract: Previous research on bracing members show that the ductility of bracing members is compromised due to the buckling phenomena. Therefore, many researchers have tried to use special considerations to increase the fracture life of bracing members. Some of these recommendations such as increasing the slenderness ratio, using lower width to thickness ratio, increasing the out-of-p...
متن کاملExperimental and Numerical Studies on the Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures
Thin-walled energy absorbers are used to reduce accident induced damages. In this study, thin-walled stainless steel structures in quasi-hemisphere geometry were subjected under quasi-static loading with Santam 150KN apparatus. Experimental results were compared with results of numerical simulations by LS-DYNA and it was shown that there is a good agreement between experimental and numerical r...
متن کاملNumerical Modelling of Timber Braced Frame Masonry Structures (Dhajji Dewari)
This paper presents numerical modeling technique for Dhajji-Dewari structures (timber-braced rubble stone masonry), and its application for the evaluation of in-plane force-deformation capacity of Dhajji wall panels of different configuration of bracings. Dhajji structures are mainly composed of vertical and horizontal timber posts and braced using diagonal bracings and horizontal studs. Wall o...
متن کامل