An analytical solution to bulk/surface partitioning
نویسنده
چکیده
Introduction Conclusions References
منابع مشابه
Analytical Solution for a Two-Layer Transversely Isotropic Half-Space Affected by an Arbitrary Shape Dynamic Surface Load
The dynamic response of a transversely isotropic, linearly elastic layer bonded to the surface of a half-space of a different transversely isotropic material under arbitrary shape surface loads is considered. With the help of displacements and stresses Green’s functions, an analytical formulation is presented for the determination of the displacements and stresses at any point in both surface l...
متن کاملNumerical Study on Resistance of a Bulk Carrier Vessel Using CFD Method
Bulk carriers have an important role in international maritime transport. In this paper, we carried out a numerical study on a model of bulk carrier vessel and calculated total resistance of the model. A model of a bulk carrier vessel with length of 2.76 m, breadth of 0.403 m and draught of 0.173 m was selected for numerical modeling. Numerical work was done by commercial CFD software ANSY...
متن کاملAnalytical Solution of The Laminar Boundary Layer Flow over Semi-Infinite Flat Plate: Variable Surface Temperature
In this paper, the problem of forced convection over a horizontal flat plate under condition of variable plate temperature is presented and the homotopy perturbation method (HPM) is employed to compute an approximation to the solution of the system of nonlinear differential equations governing the problem. This paper provides good supplements to the existing literature and generalizes the previ...
متن کاملAn employee transporting problem
An employee transporting problem is described and a set partitioning model is developed. An investigation of the model leads to a knapsack problem as a surrogate problem. Finding a partition corresponding to the knapsack problem provides a solution to the problem. An exact algorithm is proposed to obtain a partition (subset-vehicle combination) corresponding to the knapsack solution. It require...
متن کاملLoad Partitioning in a Duplex Stainless Steel with Surface Strength Gradient and Residual Stresses
The load partitioning between surface and bulk was studied by means of in-situ synchrotron energy dispersive diffraction in an SAF 2507 superduplex stainless steel having a strain hardened surface layer with compressive residual stresses. Two loading cycles with a peak tensile strain of 0.5% and 0.87%, respectively, were successively applied and the evolution of stresses in the respective const...
متن کامل