Power Combiner with Gunn Diode Oscillators
نویسنده
چکیده
Absntrct -Combiners were developed using two Gunn diodes in dielecpackaged IMPATT diodes giving 10.5-W CW output at 9.1 tric waveguide jimage line) oscillator circuits. The optimum configuration GHz. He coupled individual coaxial oscillators to a main consisted of each Gunn diode being imbedded in a separate dielectric cavity cavity from which the energy was extracted. He further I.Aas a primary source of oscillation. The dielectric resonators were then radiatively coupled to a common dielectric resonator from which the found that it was important to have minimal coupling combined power could be obtained. It was found that the combined power between the oscillators and also small coupling coefficient was greater than the sum of the power obtainable from separate isolated from the oscillator to the main cavity. The coaxial strucoscillators. The proposed combiner appears attractive from the point of tures (housing the resonators) were separated by 1/2 waveview of simplicity of construction and low cost and should be applicable to length and were individually tuned so that each the millimeter-wave region. where the difficulties of precision machined resonator-diode combination would oscillate at the same resonator-diod combinatio woml osilae t sm metal-wled cavities are very reat. frequency. Further work by Kurokawa [2] gave a detailed
منابع مشابه
GaN-based NDR Devices for THz Generation
GaN-based Negative Differential Resistance (NDR) diode oscillators have been studied by employing Gunn design criteria applicable to this material system. Numerical simulations were used to carry out large-signal analysis of the GaN NDR diode oscillators in order to evaluate their potential for THz signal generation. It was found that, due to the higher electron velocity and reduced time consta...
متن کاملLarge-signal microwave performance of GaN-based NDR diode oscillators
The GaN material parameters relevant to the negative dierential resistance (NDR) devices are discussed, and their physical models based on the theoretical predictions and experimental device characteristics are introduced. Gunn diode design criteria were applied to design the GaN NDR diodes. A higher electrical strength of the GaN allowed operation with higher doping ( 10 cmÿ3) and at a higher...
متن کاملDiode-Grid Oscillators
Loading a two-dimensional grid with active devices offers a means of combining the power of solid-state devices in the microwave and millimeter-wave range. The grid structure allows a large number of negative resistance devices to be combined. This approach is attractive because the active devices do not need an external locking signal, and the combining is done in free space. The loaded grid i...
متن کاملDry Etching Process in InP Gunn Device Technology Utilizing Inductively Coupled Plasma (ICP)
In this paper we report some recent progress in 77GHz InP Gunn device process development. Specifically, utilizing an advanced dry etching tool to define InP Gunn diode mesas. Unlike FeCl3-based photochemical etches, the Inductively Coupled Plasma (ICP) offers excellent sidewall anisotropy and uniformity, which provides improved process consistency to facilitate mass manufacturablity of millime...
متن کاملTo the memory of my beloved father
This work has as main objective the integration of planar Gunn diodes and high electron mobility transistors (HEMTs) on the same chip for the realisation of high-power oscillators in the millimeter-wave regime. By integrating the two devices, we can reinforce the high frequency oscillations generated by the diode using a transistor-based amplifier. The integration of the planar Gunn diode and t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016