Experimental Verification of STATCOM for Power Quality Improvement
نویسندگان
چکیده
This paper aims in presenting the importance of presence of STATCOM for enhancement of power quality of existing transmission network. STATCOM is used for controlling various transmission parameters such as shunt impedance, line voltage, current, active and reactive power, oscillation damping etc. Experimental controlled reading of STATCOM is obtained with the help of lab model for various parameters. Controlling is done with the help of IGBT based converters through DSP kit (for controlling firing angle of converters).This paper also presents a lab prototype of STATCOM.
منابع مشابه
Power Swings Damping Improvement with STATCOM and SMES Based on the Direct Lyapunov Method
In this paper a comprehensive approach is presented to improve power swings damping based on direct Lyapunov method. The approach combines superconducting magnetic energy storage (SMES) system with static synchronous compensator (STATCOM). Considering the energy absorption/injection ability of SMES, in transient states the combination exchanges both active and reactive powers with power system....
متن کاملVoltage Sag Mitigation in Eight Bus System Using D-statcom for Power Quality Improvement
This work deals with modeling and simulation of multi bus system using D-STATCOM. Voltage sag is increased by connecting a heavy load. The sag is mitigated using D-STATCOM. The circuit models and simulation results are presented. The Simulation results are compared with the analytical results. KeywordsDistribution Static Synchronous Compensator (D-STATCOM)
متن کاملPSCAD Simulation Model of D-Statcom for Voltage Sag Improvement
This paper deals with the modeling and simulation of Distribution Static Compensator (D-STATCOM) for voltage sag mitigation. The D-STATCOM simulation model consists of 12-pulse inverter, which is connected in shunt with the system. A generalized sinusoidal pulse width modulation (SPWM) technique was developed in the proposed controller for fast control action of the D-STATCOM. Simulations of th...
متن کاملDesign and Implementation of a STATCOM Based on a Multilevel FHB Converter with Delta-Connected Configuration for Unbalanced Load Compensation
A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is p...
متن کاملGain Tuning PID and IP Controller with an Adaptive Controller Based on the Genetic Algorithm for Improvement Operation of STATCOM
Static Synchronous Compensator (STATCOM) is a device capable of solving the power quality problems at the power system. These problems happen in milliseconds and because of the time limitation, it requires the STATCOM that has continuous reactive power control with fast response. In this way, optimal exploitation of STATCOM by classical controllers has been a controversial issue in reputable jo...
متن کامل