Evolution of structure and local magnetic fields during crystallization of HITPERM glassy alloys studied by in situ diffraction and nuclear forward scattering of synchrotron radiation.

نویسندگان

  • Marcel Miglierini
  • Márius Pavlovič
  • Vít Procházka
  • Tomáš Hatala
  • Gerhard Schumacher
  • Rudolf Rüffer
چکیده

Evolution of structure and local magnetic fields in (Fe(1-x)Co(x))76Mo8Cu1B15 (HITPERM) metallic glass ribbons with various amounts of Co (x = 0, 0.25, 0.5) were studied in situ using diffraction and nuclear forward scattering of synchrotron radiation. It was found that crystallization of all three glasses proceeds in two stages. In the first stage, bcc (Fe,Co) nanocrystals are formed, while in the second stage additional crystalline phases evolve. For all three glasses, the crystallization temperatures at the wheel side were found to be lower than at the air side of the ribbon. The crystallization temperatures were found to decrease with increasing Co content. The lattice parameters of the bcc nanocrystals decrease up to about 550 °C and then increase pointing to squeezing Mo atoms out of the nanograins or to interface effects between the nanocrystals and the glassy matrix. Nuclear forward scattering enabled separate evaluation of the contributions that stem from structurally different regions within the investigated samples including the newly formed nanocrystals and the residual amorphous matrix. Even minor Co content (x = 0.25) has a substantial effect not only upon the magnetic behaviour of the alloy but also upon its structure. Making use of hyperfine magnetic fields, it was possible to unveil structurally diverse positions of Fe atoms that reside in a nanocrystalline lattice with different numbers of Co nearest neighbours.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Structure and Thermomagnetic Properties of New FeCo-based Nanocrystalline Ferromagnets

FeCo-based ferromagnetic alloys (HITPERM variants) of composition Fe44 5Co44 5Zr7B4, Fe44Co44Zr5 7B3 3Ta2Cu1, Fe44Co44Zr5 7B3 3Mo2Cu1, and Fe37 2Co30 8Zr7B4Cu1 were prepared by melt-spinning amorphous precursors, followed by nanocrystallization. Samples were characterized using vibrating sample magnetometry (VSM), x-ray diffraction (XRD), and differential scanning calorimetry (DSC). VSM was use...

متن کامل

In-situ investigation of phase formation in nanocrystalline (Co97.5Fe2.5)89Zr7B4 alloy by high temperature x-ray diffraction

In-situ investigation of phase formation in nanocrystalline (Co97.5Fe2.5)89Zr7B4 alloy by high temperature x-ray diffraction Crystallization and phase evolution in an (Co 97.5 Fe 2.5) 89 Zr 7 B 4 amorphous alloy was studied by high temperature x-ray diffraction (HTXRD) and transmission electron microscopy (TEM). Co-based nano-composite alloys have zero magnetostriction and a strong response to ...

متن کامل

Resonant diffraction of synchrotron radiation by a nuclear multilayer.

We report the observation of nuclear resonant diffraction of synchrotron radiation by a synthetic multilayer. The nuclear period of the [57Fe(22&/Sc( 1 lA]/Fe(228i)/Sc(l l&l x 25 multilayer was chosen~ to be twice the electronic period to obtain a pure nuclear Bragg reflection. Strong enhancement of the radiative scattering channel provided a fast time response for the 57Fe resonant scattering ...

متن کامل

Structural evolution of metallic glasses during annealing through in-situ Synchrotron X-ray diffraction

In this work we study the structural evolution of Al and Fe based metallic glass compositions. The samples were obtained as ribbons by melt-spinning, their glass stability and crystallization were analyzed by calorimetry and dilatometry, structural changes were followed by in-situ synchrotron X-ray diffraction during annealing throughout glass transition and crystallization. The synchrotron res...

متن کامل

Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying

Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Physical chemistry chemical physics : PCCP

دوره 17 42  شماره 

صفحات  -

تاریخ انتشار 2015