Miniature Microwave Notch Filters and Comparators Based on Transmission Lines Loaded with Stepped Impedance Resonators (SIRs)
نویسندگان
چکیده
In this paper, different configurations of transmission lines loaded with stepped impedance resonators (SIRs) are reviewed. This includes microstrip lines loaded with pairs of SIRs, and coplanar waveguides (CPW) loaded with multi-section SIRs. Due to the high electric coupling between the line and the resonant elements, the structures are electrically small, i.e., dimensions are small as compared to the wavelength at the fundamental resonance. The circuit models describing these structures are discussed and validated, and the potential applications as notch filters and comparators are highlighted.
منابع مشابه
Microwave Dual-Band Bandpass Filter using L-shaped Stepped Impedance Resonators
This work demonstrates a microwave dual band bandpass filter using two L–shaped stepped impedance resonators (SIRs) and a coupled feed structure. The coupled feed structure can be a single sided or a double sided structure. Two sets of physical parameters are used to control the coupling coefficient and external quality factor. Thus, the specification, such as the central frequencies and the ba...
متن کاملCompact Dual-Band Bandpass Filter Based on Quarter Wavelength Stepped Impedance Resonators
This paper presents a compact dual-band bandpass filter that involves using the quarter wavelength stepped impedance resonators (SIRs) for achieving simultaneously compact circuit size and good dual-band performance. The filter is designed at 2.4 / 3.5 GHz and constructed by two pairs of quarter wavelength SIRs and source-load lines. By properly tuning the impedance ratio, length ratio and radi...
متن کاملA Wideband BPF Using SIR With Wide Spurious Suppression
The bandpass filters are most widely used in radio frequency (RF) front end equipment of the microwave wireless communication systems. The parallel-coupled line structures are popular for the bandpass filters such as the parallel-coupled lines cascaded together [1]. The parallelcoupled lines combined with open-stub lines for harmonic suppression improvement was also proposed [2]. Furthermore, s...
متن کاملConfigurations of Splitter/Combiner Microstrip Sections Loaded with Stepped Impedance Resonators (SIRs) for Sensing Applications
In this paper, several configurations of splitter/combiner microstrip sections loaded with stepped impedance resonators (SIRs) are analyzed. Such structures are useful as sensors and comparators, and the main aim of the paper is to show that the proposed configurations are useful for the optimization of sensitivity and discrimination. Specifically, for comparison purposes, i.e., to determine an...
متن کاملPlanar Microstrip Bandpass Filter with Wide Dual Bands Using Parallel-coupled Lines and Stepped Impedance Resonators
A dual-band bandpass filter with wide and highly attenuated stopbands is designed using parallel coupled microstrip line (PCML) and stepped-impedance-resonators (SIRs). The proposed filter is composed of a pair of highly coupled PCML-SIR structure and a central resonator using a low impedance rectangular microstrip. Initially, the wide dual-band performance is achieved by creating a transmissio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Micromachines
دوره 7 شماره
صفحات -
تاریخ انتشار 2016