Passive Haptic Control during Teleoperation
نویسندگان
چکیده
The basis of haptic teleoperation focuses on augmenting a user’s ability to perform a task in a remote environment. Using an energetically passive haptic master assures that the energy can only be redirected or removed from the humanmanipulator pair, guaranteeing the user’s safety. However using a passive master complicates the display of haptic forces due to the device’s limitations. The master device cannot be controlled arbitrarily, but instead can only resist the motion of the human user. This research focuses on the use of a planar passive haptic device actuated via three magneto-rheological (MR) brakes. This device is being used to teleoperate a linear motor over the internet via a UDP connection. Both the master and the slave are controlled using National Instruments (NI) hardware and LabVIEW software. The following will present and compare two actuation schemes applying traditional active teleoperation rules for to the control of the passive haptic system. The inadequacies of these schemes will be illustrated, showing the need for a more complex control scheme to produce haptic feedback in a passive system. Copyright 2006 IFAC
منابع مشابه
Controlling a Passive Haptic Master During Teleoperation
The primary goal of the research proposed here is to develop a control scheme for passive haptic devices used as a master device during teleoperation. Haptic, or force-feedback devices can be divided into two groups based on the energetic nature of their actuators, either passive or active. The research here studies the passive devices, more specifically dissipative passive devices that use bra...
متن کاملOn-Off Control of a Passive Haptic Master During Teleoperation
The main function of haptic teleoperation is to provide the user with force feedback from a remote environment. Use of a passive haptic master complicates the replication of remote forces due to the limitations of passive actuators. An active master can drive its endpoint anywhere in the workspace and produce forces limited by the output of the motors. In a passive system the position of the ma...
متن کاملBilateral Haptic Guided Robot Teleoperation Via Packet Switched Networks Using Wave Variables with Impedance Adaptation
This paper presents the use of haptic devices in teleoperation systems with motion restrictions during robot teleoperation in order to provide the operator with increased awareness and better feeling of immersion, hence, improving his ability to perform complex tasks. The use of wave variables in the proposed system renders passive the communication channel, and moreover the new packet switched...
متن کاملFour-Channel Control Architectures for Bilateral and Multilateral Teleoperation
The four-channel architecture in teleoperation with force feedback has been studied in various existing literature. However, most of them focused on Lawrence architecture and did not research other cases. This paper proposes two other four-channel architectures: passive four-channel architecture and passive four-channel architecture with operator force. Furthermore, two types of multilateral sh...
متن کاملBilateral teleoperation system stability with non-passive and strictly passive operator or environment ¬リニ
A bilateral teleoperation system comprises a human operator, a teleoperator, and an environment. Without exact models for the teleoperator’s terminations (i.e., human operator and the environment), it is typically assumed that they are passive but otherwise arbitrary. Based on this assumption, the stability of the teleoperation system is investigated through Llewellyn’s absolute stability crite...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006