Modal Analysis of Cylindrical Gears with Arcuate Tooth Trace
نویسندگان
چکیده
In this paper, the forming principle, meshing features and tooth surface equation were introduced. And the modal parameters distribution of cylindrical gears with arcuate tooth trace was researched. The results show: 1. The modulus was the biggest impact factor for modal and natural frequency of cylindrical gears with arcuate tooth trace, then tooth width, and the radius of tooth line have the minimum influence; 2. When the modulus increased, natural frequency of cylindrical gears with arcuate tooth reduced rapidly; 3. When the tooth width increased, natural frequency of cylindrical gears with arcuate tooth has a tendency to rise except for first-order modal; 4. The influence of radius of tooth line can be basic ignored; 5. The second-order modal and third-order modal, fifth-order modal and sixth-order modal was very close. The research on cylindrical gears with arcuate tooth trace in this paper has a certain reference value on gear design and selection.
منابع مشابه
Method of Processing and an Analysis of Meshing and Contact of Circular Arc Tooth Trace Cylindrical Gears
This paper presents the investigation into the tooth profile features, meshing characteristics and the principle of forming circular arc tooth race cylindrical gears (CATT gears). Based on the meshing theory of the curvilinear gear, tooth surface equations and meshing line equations of the gears and rack shave been established. The graphical analysis of these equations shows meshing performance...
متن کاملSliding Friction Contact Stiffness Model of Involute Arc Cylindrical Gear Based on Fractal Theory
Gear’s normal contact stiffness played an important role in the mechanical equipment. In this paper, the M-B fractal model is modified and the contact surface coefficient is put forward to set up the fractal model, considering the influence of friction, which could be used to calculate accurately the involute arc cylindrical gears’ normal contact stiffness based on the fractal theory and Hertz ...
متن کاملDesign, Meshing Characteristics and Stress Analysis of Cylindrical Gears with Curvilinear Tooth Profile
Curvilinear tooth gears are commonly produced on a face milling cutter and a hob cutter. However, this paper proposes a kind of curvilinear tooth gear which is processed by a parallel linkage with a single blade cutter. For the purpose of identifying the meshing and contact characteristics of curvilinear tooth gears, the paper covers the following: (i) equations of tooth surfaces are deduced fr...
متن کاملExperimental and Numerical Free Vibration Analysis of Hybrid Stiffened Fiber Metal Laminated Circular Cylindrical Shell
The modal testing has proven to be an effective and non-destructive test method for estimation of the dynamic stiffness and damping constant. The aim of the present paper is to investigate the modal response of stiffened Fiber Metal Laminated (FML) circular cylindrical shells using experimental and numerical techniques. For this purpose, three types of FML-stiffened shells are fabricated by a s...
متن کاملThe Equation of the Contact Line of the Involute Curvilinear-Tooth Cylindrical Gear Pump for the Agricultural Tractor
In order to derive the equation of the contact line of the involute curvilinear-tooth cylindrical gear pump for the agricultural tractor, the tooth surface of the involute curvilinear-tooth cylindrical gear is firstly generated as that of the spur or helical gear. Then the equation of the tooth surface is derived from changing the settings and orientations of the coordinate systems after the eq...
متن کامل