Energy Genration from the Biomass in Pulp and Paper Mill

The production of pulp and paper is associated with the generation of large quantities of wastewater that has to be purified to avoid severe pollution of the environment. Wastewater purification in pulp and paper mills combines sedimentation, biological treatment, chemical precipitation, flotation and anaerobic treatment, and the specific combination of techniques is determined by the local conditions. Wastewater treatment generates large volumes of sludge that after dewatering can be incinerated and thus used for bio-energy production. Sludge is currently viewed as biofuel of poor quality due to its high water content, and some mills treat it solely as a disposal problem. The paper reviews the current state and tendencies in using as a fuel of solid wastes generated in pulp and paper mills. A description of biomass-derived wastes regarding their opportunity to be used for energy recovery is presented. The heating properties of wood wastes, rejects from recycled paper processing, paper sludge, and low-quality recovered paper grades are discussed. Some aspects of emission of greenhouse gases (GHG) are also presented. Keywords-air emissions, biomass incineration, environment, pulp and paper, solid wastes