Design Guidelines for Energy-Constrained Wireless Applications

During the last two decades, wireless communication has been revolutionized by near-capacity Error-Correcting Codes (ECCs), such as Turbo Codes (TCs), which offer a lower Bit Error Ratio (BER) than their predecessors, without requiring an increased transmission Energy Consumption (EC). Hence, TCs have found widespread employment in spectrum-constrained wireless communication applications, such as cellular telephony, Wireless Local Area Network (WLAN) and broadcast systems. Recently however, TCs have also been considered for energyconstrained wireless communication applications, such as Wireless Sensor Networks (WSNs) and the ‘Internet of Things’ (IoT). In these applications, TCs may also be employed for reducing the required transmission EC, instead of improving the BER. However, TCs have relatively high computational complexities and hence the associated signal-processing-related ECs are not insignificant. Therefore, when parameterizing TCs for employment in energy-constrained applications, both the processing EC and the transmission EC must be jointly considered. In this tutorial, we investigate holistic design methodologies conceived for this purpose. We commence by introducing turbo coding in detail, highlighting the various parameters of TCs and characterizing their impact on the encoded bit rate, on the Radio Frequency (RF) bandwidth requirement, on the transmission EC and on the BER. Following this, energy-efficient TC decoder ApplicationSpecific Integrated Circuit (ASIC) architecture designs are exemplified and the processing EC is characterized as a function of the TC parameters. Finally, the TC parameters are selected in order to minimize the sum of the processing EC and the transmission EC.