Single step sol–gel made gold on alumina catalyst for selective reduction of NOx under oxidizing conditions: effect of gold precursor and reaction conditions
نویسندگان
چکیده
We report the effect of gold precursor and reaction conditions on the catalytic activity of gold-alumina catalysts prepared by the sol–gel process. Gold catalysts prepared by the sol–gel method were found to be the most active catalysts ever reported in the literature. We found out that the final activity of Au on alumina was a strong function of the gold loading, the gold precursor and an activation procedure. The Au on alumina catalyst, prepared with 0.8 wt.% gold loading and gold acetate, showed the highest activity. Increasing the feed oxygen concentration had many beneficial effects on the activity and also resulted in the broadening of the temperature window of activity for the 0.8 wt.% Au(acetate) on alumina catalyst. Interestingly, we found out that N2 selectivity of the catalyst was a strong function of water in the feed. The 100% N2 selectivity at peak conversion, obtained under the dry reaction conditions, decreased to ∼58% when there was ∼2% water in the feed. © 2002 Elsevier Science B.V. All rights reserved.
منابع مشابه
Synthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کاملSelective Oxidation of Lauryl Alcohol to Lauraldehyde under Liquid-Liquid Phase Transfer Catalysis (LL-PTC) with Potassium Chromate as the Oxidizing Agent
In the present research, the selective oxidation of lauryl alcohol to lauraldehyde was studied under liquid-liquid phase transfer conditions using potassium chromate (K2CrO4) as an oxidizing agent and tetrabutyl ammonium bromide (TBAB) as the phase transfer catalyst. Chromium (VI) reagents are used in these oxidations since the alcohols are selectively oxidized <e...
متن کاملSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
متن کاملSynthesis of 4-(trifluoromethyl) coumarins using nano sulfated-titania as solid acid catalyst under solvent-free conditions
Nano sulfated titania was tested as solid acid heterogeneous catalyst for the synthesis of 4-(Trifluoromethyl) coumarin and coumarin derivatives under solvent-free condition. Factorial design evidenced a positive effect of reaction temperature, amount of catalyst, and solvents. This nano-sized sulfated titania has been prepared by a sol-gel hydrothermal process. The prepared sulfated titania s...
متن کاملThe zinc chromium ferrite magnetic nanoparticles ZnCrFeO4: An efficient catalyst for acetylation of alcohols, phenols and amines under solvent-free conditions
In this study, the zinc chromium ferrite magnetic nanoparticles ZnCrFeO4 are synthesized via sol-gel method and characterized by X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The XRD analysis showed that ZnCrFeO4 has single-phase cubic structure. The synthesized ZnCrFeO4 has been used as an efficient catalyst for acetyl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002