Experimental study of the effect of disorder on subcritical crack growth dynamics.

نویسندگان

  • O Ramos
  • P-P Cortet
  • S Ciliberto
  • L Vanel
چکیده

The growth dynamics of a single crack in a heterogeneous material under subcritical loading is an intermittent process, and many features of this dynamics have been shown to agree with simple models of thermally activated rupture. In order to better understand the role of material heterogeneities in this process, we study the subcritical propagation of a crack in a sheet of paper in the presence of a distribution of small defects such as holes. The experimental data obtained for two different distributions of holes are discussed in the light of models that predict the slowing down of crack growth when the disorder in the material is increased; however, in contradiction with these theoretical predictions, the experiments result in longer lasting cracks in a more ordered scenario. We argue that this effect is specific to subcritical crack dynamics and that the weakest zones between holes at close distance to each other are responsible for both the acceleration of the crack dynamics and the slightly different roughness of the crack path.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Determination of Tensile Strength and Crack Growth of a Typical Polymer Concrete Using Circular Disc Samples

Cracked and un-cracked Brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (PC) material. The value of mode I fracture toughness (KIc) was determined from the center- cracked Brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked Brazilian disc specimen. The...

متن کامل

Effect of Compressive Residual Stress on the Corner Crack Growth

In the present study, plasticity induced crack closure (PICC) concept and three dimensional (3D) finite element methods (FEM) are used to study the effect of compressive residual stress field on the fatigue crack growth from a hole. To investigate the effect of compressive residual stress on crack opening levels and crack shape evolution, Carlson’s experiments were simulated. Crack shape evolut...

متن کامل

A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel

Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...

متن کامل

Thermal activation of rupture and slow crack growth in a model of homogenous brittle materials

– Slow crack growth in a model of homogenous brittle elastic material is described as a thermal activation process where stress fluctuations allow to overcome a breaking threshold through a series of irreversible steps. We study the case of a single crack in a flat sheet for which analytical predictions can be made, and compare them with results from the equivalent problem of a 2D spring networ...

متن کامل

Predicting the Crack Growth Behavior in a Filled Elastomer

In this study, single-edge cracked uniaxial specimens with an initial crack length of 0.1 in or 0.3 in and wedge-shaped sheet specimens with an initial crack length of 0.3 in were tested at a constant displacement rate of 50 in/min under 1000 psi confining pressure. The specimens were made of a highly filled polymeric material, containing 86% by weight of hard particles embedded in a rubbery ma...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 110 16  شماره 

صفحات  -

تاریخ انتشار 2013