UWB printed monopole antenna with a notch frequency for coexistence with IEEE 802.11a WLAN devices

نویسندگان

  • Rakhesh Singh Kshetrimayum
  • Jyoti Ranjan Panda
  • Ramu Pillalamarri
چکیده

In this paper, we have investigated a printed modified circular disc monopole antenna with cross-shaped slot in radiating patch for UWB applications. The proposed antenna covers the entire UWB band (i.e., 3.1GHz to 10.6GHz) except the frequency band of IEEE 802.11a (i.e., from 5.15GHz to 5.83GHz). This UWB antenna will be of use in environments where IEEE 802.11a WLAN devices are already in operation, such UWB antenna could coexist with IEEE 802.11a devices without any interference. Simple rectangular microstrip line is used for feeding the printed monopole antenna. We have simulated modified circular disk monopole antenna with cross-shaped slot using Zeland IE3D software and it has been observed that the notch frequency response of the antenna can be adjusted by the changing the position of the cross-shaped slot in the radiating patch.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Novel Small E–Ring Shaped Monopole Antenna with Dual Band-Notch Function for UWB Wireless Communications

This paper presents an E-ring shaped printed monopole antenna for UWB applications with dual notched bands performance. In order to generate single frequency band notch function, we applied a U-ring shaped monopole antenna, and by inserting a rectangular ring in the centre of it an E-ring shaped radiating patch created and a dual band-notch function can be achieved. The measured bandwidth of th...

متن کامل

Multi Attribute Analysis of a Novel Compact UWB Antenna with Via-fed Elements for Dual Band Notch Function (RESEARCH NOTE)

A compact microstrip-fed antenna with dual notched bands is proposed. First, a simple basic configuration is presented for Ultra Wide Band (UWB) applications and then the dual band notched structure is extended from the UWB one. The basic structure of the UWB antenna consists of a simple square radiating patch and a ground plane with a wide square slot on back of the substrate. A semi-circle sh...

متن کامل

Ultra Wideband Monopole Antenna Excited by a Capacitive Coupling Feed with Double Band Notch Function

This paper presents the results of a new monopole antenna that exhibits 2.75-10.7 GHz performance. The proposed antenna consists of a radiating patch with notches excited by capacitive coupling feed. Also, the antenna’s truncated ground-plane incorporates a central notch. This modification significantly improves the antenna’s impedance bandwidth by 118% over an ultra-wideband frequency range. T...

متن کامل

A Novel Compact Ultra-Wideband Antenna with Single and Double Band Rejection

Band-notch characteristic has been of great interest recently to overcome the electromagnetic interference of Ultra-wideband systems (UWB) with other existing ones. In this paper, we present a novel microstrip-fed antenna with band rejection property appropriate for UWB applications. Band-notch characteristic has been achieved by adding a rectangular resonant element to the ground section. A pr...

متن کامل

A Very Compact and Low Profile UWB Planar Antenna with WLAN Band Rejection

A low-cost coplanar waveguide fed compact ultrawideband (UWB) antenna with band rejection characteristics for wireless local area network (WLAN) is proposed. The notch band characteristic is achieved by etching half wavelength C-shaped annular ring slot in the radiating patch. By properly choosing the radius and position of the slot, the notch band can be adjusted and controlled. With an overal...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009