Micro-spectroscopy on silicon wafers and solar cells
نویسندگان
چکیده
Micro-Raman (μRS) and micro-photoluminescence spectroscopy (μPLS) are demonstrated as valuable characterization techniques for fundamental research on silicon as well as for technological issues in the photovoltaic production. We measure the quantitative carrier recombination lifetime and the doping density with submicron resolution by μPLS and μRS. μPLS utilizes the carrier diffusion from a point excitation source and μRS the hole density-dependent Fano resonances of the first order Raman peak. This is demonstrated on micro defects in multicrystalline silicon. In comparison with the stress measurement by μRS, these measurements reveal the influence of stress on the recombination activity of metal precipitates. This can be attributed to the strong stress dependence of the carrier mobility (piezoresistance) of silicon. With the aim of evaluating technological process steps, Fano resonances in μRS measurements are analyzed for the determination of the doping density and the carrier lifetime in selective emitters, laser fired doping structures, and back surface fields, while μPLS can show the micron-sized damage induced by the respective processes.
منابع مشابه
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملStudy the Effect of Silicon Nanowire Length on Characteristics of Silicon Nanowire Based Solar Cells by Using Impedance Spectroscopy
Silicon nanowire (SiNW) arrays were produced by electroless method on polycrystalline Si substrate, in HF/ AgNO3 solution. Although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. In order to study the influence of etching time (which affects the SiNWs length) on d...
متن کامل15 th Workshop on Crystalline Silicon Solar Cells and Modules : Materials and Processes
Chemical and crystallographic defects are a reality of solar grade silicon wafers and industrial production processes. Long overlooked, phosphorus as a dopant in silicon wafers is an excellent way to mitigate recombination associated with these defects. This paper details the connection between defect recombination and solar cell terminal characteristics, for one specific case of high hole life...
متن کاملNon-destructive evaluation methods for subsurface damage in silicon wafers: a literature review
The Subsurface Damage (SSD) in silicon wafers induced by any mechanical material-removal processes has to be removed by subsequent processes. Therefore, the measurement of SSD is critically important for cost-effective manufacturing of silicon wafers. This review paper presents several Non-Destructive Evaluation (NDE) methods for SSD in silicon wafers, including X-ray diffraction, micro-Raman s...
متن کاملThe emergence of n-type silicon for solar cell manufacture
The great majority of solar cells manufactured today are based on p-type silicon wafers. However, the most efficient modules are made with n-type silicon wafers. This is primarily due to the much greater tolerance of n-type silicon to the dominant defects in p-type material. In this paper we discuss some of the potential advantages and disadvantages of using por n-type silicon for industrial so...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 6 شماره
صفحات -
تاریخ انتشار 2011